VAG-COM/VCDS EVERYTHING

**mattydr67** · 31st March, 2011, 08:52 AM

Originally Posted by LuisAndre

No my friend... You dont understand... And when i say You, I mean a lot of You... There is no fuse bomb. You can't downgrade to any version... but you can't upgrade either, simply because the cracked version will mark interface as an unregistered cable on the AT eeprom area... Why it still works on a cracked version? because the cracked version bypass that check. The right way to say it is: you can't use an original version after use a cracked one...
And you can use a previous version... If you use a cracked previous version. Now you know why yellow guys sells the crap cable and provide software version 708, 805,908,912 and 10.6. ALL CRACKED and with the warning : Do not use this crap cable with any other software...

(Sorry, i don't like Mr. Wang.)

And good luck to you too.

That's what I wanna said. Thanks.
When I use original version of 10.6.0 with BL tool and I told you that it works with your loader.
But I can't downgrade to original 10.6.0 sw
That's it. If I will need a tool to change the sw I will buy a genuine tool.
Good luck

**angelx431** · 31st March, 2011, 09:58 AM

Originally Posted by nkstyle

Can you share this backup?

I also trying repair FT232R with FT_Prog but i dont have the backup.

vcds 10.6.2 ft232rl.ept

**mladen76** · 31st March, 2011, 02:45 PM

Originally Posted by LuisAndre

No my friend... You dont understand... And when i say You, I mean a lot of You... There is no fuse bomb. You can't downgrade to any version... but you can't upgrade either, simply because the cracked version will mark interface as an unregistered cable on the AT eeprom area... Why it still works on a cracked version? because the cracked version bypass that check. The right way to say it is: you can't use an original version after use a cracked one...
And you can use a previous version... If you use a cracked previous version. Now you know why yellow guys sells the crap cable and provide software version 708, 805,908,912 and 10.6. ALL CRACKED and with the warning : Do not use this crap cable with any other software...

(Sorry, i don't like Mr. Wang.)

And good luck to you too.

First thanks for the detaild explanation,and have to ask beginer question couse there is a lot information I dont understand,that crap cable you talk whit all the versions the chines send 708, 805,908,912 and 10.6 my antivirus only recognize v 908 as virus,but my question is,can I use this cable to do vw diagnostic,long coding.... and what software to use??

**tk500** · 31st March, 2011, 04:01 PM

Originally Posted by LuisAndre

No my friend... You dont understand... And when i say You, I mean a lot of You... There is no fuse bomb. You can't downgrade to any version... but you can't upgrade either, simply because the cracked version will mark interface as an unregistered cable on the AT eeprom area... Why it still works on a cracked version? because the cracked version bypass that check. The right way to say it is: you can't use an original version after use a cracked one...
And you can use a previous version... If you use a cracked previous version. Now you know why yellow guys sells the crap cable and provide software version 708, 805,908,912 and 10.6. ALL CRACKED and with the warning : Do not use this crap cable with any other software...

(Sorry, i don't like Mr. Wang.)

And good luck to you too.

After is used your loader any other version (new or old) will destroy the eeprom
Also if the software knows it's modded can not say what would do - wrong DTC, codding, long codding and etc.
Chinese use cracked versions started form 908 and mainly from 10.6x.

**Qwarz** · 31st March, 2011, 05:55 PM

I have been testing loader several times and VCDS is still alive

My configuration is VCDS 908 with flash 1.81.

**mbenz1** · 2nd April, 2011, 12:17 PM

I just recieved a vag106 cable from china. The guy put a note in to message him when i get it and he would send the file. I have, bu i have to wait probably till tomorrow due to time difference.

Does anyone have this file? im guessing its not going to be the original one from ross-tech site.

Edit: it has RL chip

**tk500** · 2nd April, 2011, 01:51 PM

Originally Posted by mbenz1

I just recieved a vag106 cable from china. The guy put a note in to message him when i get it and he would send the file. I have, bu i have to wait probably till tomorrow due to time difference.

Does anyone have this file? im guessing its not going to be the original one from ross-tech site.

Edit: it has RL chip

will work badly with cracked only soft

**mbenz1** · 2nd April, 2011, 03:01 PM

Originally Posted by tk500

will work badly with cracked only soft

I don't understand. Do you mean I must not use cracked software with this cable?

**max4ever** · 2nd April, 2011, 03:17 PM

Exactly M8! Don't use cracked software for your interface, otherwise, your interface its gone!

**mattydr67** · 2nd April, 2011, 03:17 PM

With cracked sw works badly but you don't have anythingelse to do. This is it.
Good luck

**mbenz1** · 2nd April, 2011, 03:23 PM

Ok cheers, so should i use original software from ross-tech only?

Where from? which version? 10.6 or 10.6.3?

Sorry about all the questions i just dont want to burn this cable.

**max4ever** · 2nd April, 2011, 06:17 PM

Only 10.6 or old version!

**mbenz1** · 2nd April, 2011, 06:26 PM

Originally Posted by max4ever

Only 10.6 or old version!

Ok. Thanks but I can't find the original 10.6.0 without crack anywhere. Rosstech only show 10.6.3 on their site.

Thanks

**mattydr67** · 2nd April, 2011, 07:48 PM

Originally Posted by mbenz1

Ok. Thanks but I can't find the original 10.6.0 without crack anywhere. Rosstech only show 10.6.3 on their site.

Thanks

M8 if you have a tool with Ft232RL inside do not use original version of VCDS.
Use just cracked chinese softwears.
Original softwears from ross-tech works with tools with FT232BL or BM inside.
If I said someting wrong please forgive me.
Good luck