VAG-COM/VCDS EVERYTHING

[kaalis]

Would like to flash it, but don't know where I can connect wires from USBASP.

You can open pdf file in kolimer loader archive and see connection diagram.


Sent from my VOG-L29 using Tapatalk

[PetitLuc]

Hi Wiechec and Kaalis,
I looked at Kolimer pdf file, but the pinout is not the same as for my PCB.
On my PCB, there are 8 holes, but it seems only #5 is linked to pin 18 of MCP2515, so I doubt this is for ASP communication
VAG12.10.3_A.jpg

[PetitLuc]

Hi Wiechec and Kaalis,
I looked at Kolimer pdf file, but the pinout is not the same as for my PCB.
On my PCB, there are 8 holes (J2), but it seems only #5 is linked to pin 18 of MCP2515, so I doubt this is for ASP communication
VAG12.10.3_A.jpg

[kaalis]

You can solder directly to legs of chips if you don't have multimeter.

Sent from my VOG-L29 using Tapatalk

[PetitLuc]

Yes. I would have preferred big pins to connect to, those chips legs are a bit small for me, especially reset line on ATMEL 162, but I'll try!
Thanks

[fuzz1]

Hello

Just need some help on this cable

2021 Newest HEX V2 Interface Super Vag COM 20.12 FOR VW AUDI Skoda Seat VAG 20.4.2 English Polish German French Atmega162

Is it any good for scanning A4 B9 and can it be used for long coding, is the vin number restricted?


Thanking you

[wiechec]

Hello

Just need some help on this cable

2021 Newest HEX V2 Interface Super Vag COM 20.12 FOR VW AUDI Skoda Seat VAG 20.4.2 English Polish German French Atmega162

Is it any good for scanning A4 B9 and can it be used for long coding, is the vin number restricted?


Thanking you

Look for with STM32F405VGT6. It is newer and supports the latest cars.

[fuzz1]

Hi

Thanks for your advice. Been going through the forum and lots have been recommending atmega. There's so much to read that i gave up.

But can stm32 be updated? Is it vin limited.

[wiechec]

STM32F405VGT6 can be updated and have no VIN limit.

[Tomas003]

YES, unlimited VIN and update fimware

[Tomas003]

STM32F405VGT6 can be updated and have no VIN limit.

YES, unlimited VIN and update fimware

[fuzz1]

Do you know if you can do long coding? Thanks

[Tomas003]

YES, long coding available

Do you know if you can do long coding? Thanks

[thosbeans]

Hi, I have here a STM32F15 Ross-Tech clone cable.
Is there any way to update the firmware to use versions >20.4?
It's failing to communicate with some modules like the instrument cluster. Annoying since I want to reset my service reminder.
Thanks in advance for any info

[inhosik]

Where to download the latest version of VII loader? Do the cable software also need to be updated? Is there a separate program for this? I have the version as in the picture, is it the newest?

Przechwytywanie.JPG