Okay thanks i try to another windows ( 7 ) without antivirus.
i have second question
Can i update software to version 23 with my cable?
may be i need another flash and loader ?
thanks
It's working only with that loader, do not try to updated with viiplusloader at all, your interface will get locked if you update via viiplusloader.
You must wait for your seller to release a new loader version that works with your interface and send it to you, there's no other way.
Sent from my SM-A546B using Tapatalk
Okay thanks i try to another windows ( 7 ) without antivirus.
i have second question
Can i update software to version 23 with my cable?
may be i need another flash and loader ?
thanks
nope, will not work with 23 versions, latest loader for Atmega is Kolimer 9.2 and working only with VCD$ 20.12.0 latest if i remember well
@Fabio89 check your PM
Fabio, what will you do after fixing it? Resell the stuff locally?
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
Hello. I replaced an ABS pump on my A5 2014. The pump has the same part nr as the old one. However I am struggling with the long coding. Recovering the old coding from the old pump is not an option because the pump is damaged from the crash. Is there an other way to code it besides the regular online code?
Link for BadraxVIILoader_V9.23.09.001_2303_R1
https://mega.nz/folder/2YU3wAxZ#THyYgQtNtRWuywp-0A03ZQ
KoSTeK (30th November, 2023)
it seems with latest software V23.11.0 , and have SFD function now.
Last edited by SCANNEROBD; 30th November, 2023 at 04:05 AM.
I get information :
1.FLY VCDS Hex-V2 SFD function is ok, coming soon.
2.Added TP16 protocol.
Last edited by SCANNEROBD; 30th November, 2023 at 04:12 AM.
seal777 (5th December, 2023)
Hi All, I bought (and successfully used) a VCDS clone cable last year running 22.3 software and using the VCDSLoader to start it. Came to use it again a few days ago and by mistake, still had the WiFi switched on my laptop and now I can't use the software. I've taken my cable apart and it seems to have the ATMEGA162 chip (see attached photos). Is there any way I can re-flash / fix my cable so I can use it again? Many thanks!
IMG_20231128_155546.jpgIMG_20231128_155617.jpgIMG_20231128_155632.jpg
Hello
What interface does this work with?
Because I have a read device status fail
Bookmarks