Mega.nz VCDS Hex-V2 VIIPlusLoader-08.021.05 link
1. Support V21.3.0
2. VIIPlusLoader support multi-languages
https://mega.nz/file/05M2iTpZ#TI537M...u7H5n22LjOjE7g
vcds hex-v2 ross-tech english software version is 21.3.0
seal777 (22nd April, 2021)
@ fly mcp next to it too .
I'd like to identify that too.
I suspect there is a short or some defective component.
Upon plugging device in, it drains excessive current, way over what the voltage regulator is designed for, causing the defective component to blow up as well as the voltage regulator itself.
Telling that "just replace voltage regulator and it should be fine" is nothing but a joke.
I also suspect that STM chip gets fried as well, judging by its discoloration observed in photos posted in this thread.
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
jan4 (21st April, 2021)
Last edited by networkers; 21st April, 2021 at 03:41 PM.
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
That's why I'm using my V1 or V2 with 415 chip. Nothing is burning and no need to change any chips.
few and individual MIC2920A-5.0WS can not work more than 12V, please ask your seller to confirm.
Last edited by flyfvdi; 22nd April, 2021 at 04:04 AM.
Bookmarks