VAG-COM/VCDS EVERYTHING

**mattydr67** · 23rd May, 2012, 09:40 PM

You need to flash the Atmega first and then you ahve to isntall the VCDs 11.11.0 softwear and if you want that your tool to work you need a loader becasue you've got a RL tool
Good luck

**tricoredc17** · 23rd May, 2012, 09:52 PM

Originally Posted by mattydr67

You need to flash the Atmega first and then you ahve to isntall the VCDs 11.11.0 softwear and if you want that your tool to work you need a loader becasue you've got a RL tool
Good luck

Send me the loader? Thanks

**KenshinPT** · 23rd May, 2012, 10:37 PM

Hey mates!

Anyone saw one of this?

Any help will be appreciated

Regards.

**oep** · 23rd May, 2012, 10:47 PM

what help do you need, or what problem do you have?

**XPS** · 23rd May, 2012, 10:49 PM

Originally Posted by KenshinPT

Hey mates!

Anyone saw one of this?

Any help will be appreciated

Regards.

It is the NEC chip with firmware 1.84.

**KenshinPT** · 23rd May, 2012, 10:49 PM

Originally Posted by oep

what help do you need, or what problem do you have?

Look at the ATMEGA, or should I say NEC?

Anyone knows how this works? How the FLASH and EEPROM of an ATMEGA can be fitted on another uC?!

I don't even find the datasheet for this chip! ^^!

Regards

**oep** · 23rd May, 2012, 11:05 PM

i know, and so far never seen anyone except mr lee has dump for this

**mattydr67** · 24th May, 2012, 04:48 AM

Originally Posted by tricoredc17

Send me the loader? Thanks

I cannot
Sorry
Good luck

**mattydr67** · 24th May, 2012, 04:49 AM

Originally Posted by KenshinPT

Hey mates!

Anyone saw one of this?

Any help will be appreciated

Regards.

As I told you a PM before buy this kind of VCDS, I haven't see any dump for this yet
Good luck

**KenshinPT** · 24th May, 2012, 07:51 AM

Originally Posted by mattydr67

As I told you a PM before buy this kind of VCDS, I haven't see any dump for this yet
Good luck

I am working out this with the seller... the seller thought that this had an ATMEGA.

Thank you though

About the datasheet... anyone know where I can find it?

**magadan** · 24th May, 2012, 10:21 AM

Originally Posted by KenshinPT

I am working out this with the seller... the seller thought that this had an ATMEGA.

Thank you though

About the datasheet... anyone know where I can find it?

In this controler flash volume more than in atmega. And speed of operation is higher. Chinese wrote the environment emulator atmega. Also used a flash and eeprom from atmega (v 11.2).
So I think.
I tried to write such emulator itself. But couldn't. Knowledge didn't suffice.
Also Chinese disconnected an update of a flash of this cable through USB-port. I wanted to load a special flash in a cable to get full access to the controler as I did it on a cable with atmega. But it turned out nothing.
And in your cable, already something new. There is no GAL, probably in the emulator registered also switch functions. But can already and own flash wrote.
In the free access I this flash didn't see. And this flash isn't necessary to professionals. Therefore it is necessary to look for the Chinese author.
Here it is datasheet on the similar controler.