VAG-COM/VCDS EVERYTHING

[hcsaibot]

Well i followed the "tutorial" found in this section
got to the part where you use ponyprog
issued the erase command , the led on the pcb blinked and an error message unkown something.

now the only message i get is device missing or unknown device -24 on pony prog

any ideas?

use an usb ISP it is mutch easyer as ponyprog

New USB 51 AVR ISP Programmer Downloader USBASP usbisp | eBay

[liviudiaconu]

[...] device missing or unknown device -24 on pony prog

any ideas?

Have yoy LPT "native" or PCMCIA or another adapter?
If yess, must create a line in .ini file of pony.

And.. obviously LPT setings on ECP

[mattydr67]

-24 means no communication
Can be anything worng or with other words you can make anything wrong and you have no communication between softwear and Atmega
This can be becasue of softwear, becasue of programmer, because of computer BIOS or becasue of wiring connection
Where do you think thta you have to start to fix this?
Check all and then try again
Good luck

[cocoh]

hi..

Please guys, tell me what I have to remove from this PCB...

vag_com_03.jpg

vag_com_02.jpg

best reagrds

[1 6 D]

A friend gave me Chinese 11.11.3 RL clone to repair, does anybody have dump for it and can share? Original flash and eeprom can't be read because of setting of Lock Byte in Atmega.

[liviudiaconu]

hi..

Please guys, tell me what I have to remove from this PCB...
[...]

Remove U9.........

[hcsaibot]

A friend gave me Chinese 11.11.3 RL clone to repair, does anybody have dump for it and can share? Original flash and eeprom can't be read because of setting of Lock Byte in Atmega.

Can you reflash the Atmega oris it locked?

[hcsaibot]

Remove U9.........

... and flash the GAL

[1 6 D]

Can you reflash the Atmega oris it locked?

Yes, I have USBasp to flash it. Friend want 11.11.3 version because for he have model year 2013 car and 11.11.0 don't have labels for his car. For him chinese 11.11.3 is enough with his limitations.

[hcsaibot]

Yes, I have USBasp to flash it. Friend want 11.11.3 version because for he have model year 2013 car and 11.11.0 don't have labels for his car. For him chinese 11.11.3 is enough with his limitations.

chines dumps are crap and non puplic

i know the 11.11.0 dump, i think the 11.11.3 isnt public

[liviudiaconu]

... and flash the GAL

Are you sure? If yes, why?

[hcsaibot]

Are you sure? If yes, why?

i think. 3 interface that i have repair i must change the gal.
I have remove and solder jumpers
When the crap secure chip (u9) is installed the GAL are not the same as the org. interfaces

[liviudiaconu]

The 3 interfaces are with BM or with RL?

[hcsaibot]

The 3 interfaces are with BM or with RL?

All 3 are newer interfaces with RL

Take a look at this post

http://www.digital-kaos.co.uk/forums...ml#post1795425

[mattydr67]

Liviu have right
In the interface with BL/BM you don't need to reflash GAL/ATF
In one kind of RL tool you don't need to reflash GAL either
In one kind of BL/BM tools you don't need to remove STC ( U9 )
Good luck