nagyelek1982 (19th August, 2017)
Before the latest version of the program did not work. Chip is BL. With v2 version everything is fine
Thank you Kolimer
Hello peeps is it worth me buying one of these
Look at this on eBay http://www.ebay.co.uk/itm/272810527761
And will I be able to keep it going with the flash files on this thread? And update it??
Or is it best just to buy a cable and get software "elsewhere". If so what cable do people find works best ?
Thanks
Hi all
I have my old version 16.8 and it didnt work. I can try repaire it . This is PCB but i dont know how i can connect it to prgramer USBasp ? Anybody can describe me PINout on my PCB ? Or i must solder to pin to ATMEGA ?
IMG_20170819_190422.jpg
IMG_20170819_184453.jpg
IMG_20170819_184547.jpg
It is with STC chip, and from info manual i know that i must cut wire to resistor R50. But after programming again connect ?
But how connect interface to programmer ? Pin on PCB describe is as G T R V ? But how connect MOSI MISO SCK RST GND VCC ?
Last edited by pepeEL; 19th August, 2017 at 06:53 PM.
Too expensive. Buy this one http://www.obd2cartool.com/atmega162...t-skoda-p-1404 which has programming header.
Hello buy a vagcom cable 17.3.1 in a chinese seller and I can not actvate the interface because it brings me loader file and generate file dat to me.
Does anyone know how to generate that file? thanks
http://www.obdkcan.com/vcds-1713-vag...oda_p1290.html
Here are the files of vagcom thanks https://uploadocean.com/rd5ir6rguctn
Last edited by pacomasi; 20th August, 2017 at 08:38 AM.
Papiti56 (14th January, 2018)
Hi everyone,
I have a,nsked some questions in here the last week, but no answers.
On the talk in here I understand that my questions would be easy to answer for many people, but no help ....
Is this group not accepting new members?
Wont anyone help others than their old friends?
best regards,
Last edited by ChopstiX; 20th August, 2017 at 11:39 AM. Reason: missing text
Hi! a have a same interface, maybe from another seller....
I contacted with the seller, and the seller forwarded me to the interface/loader manufacturer..
and they activated my program by TeamViewer....
and everything was fine for a few days... the cable license is gone away...
a contacted with the seller, no answer
And i found this topic, thanks KOLIMER i can fix my interface... this is far as the best soulution ever...
Hi all
I have destroyed my old cabel VCDS 16.8 as i show in post #5164
I flashed it succesfull by KOLIMER files and when i connect it to my car and go to test show me that interface found but not plug in to car. Look on screen. What is a problem ? What is destroyed and what i must check ? By files KOLIMER show that is version 0x46 and it is with chip STC. To flash i cut line from resistor R50 to STC chip, and after flash i connect againe line R50 to STC. It is correct ?
vcds168.jpg
Please help me. In PC is detected interface.
Thanks for help.
Last edited by pepeEL; 24th August, 2017 at 08:01 PM.
You must not connect the line again on the R50.
regards
That loader not working correctly.. something wrong with fault codes. Cant attach screenshot from phone..
oep (25th August, 2017)
Loader works perfect.I think you writte wrong fuse.
Hello, you have to activate a file "request_licence.DAT" to finalize the procedure Loader-V2
Do you have the solution to generate this key please?
Last edited by remyj; 26th August, 2017 at 05:03 PM.
Bookmarks