VAG-COM/VCDS EVERYTHING

[dasXTC]

Attachment 507766Attachment 507767Attachment 507768hid3 I'm sending pictures

Got a slightly different version: IMG_20180215_223000541.jpgIMG_20180215_223218682.jpg

It's activated for 17.8.0 english version.

How did you flashed to a different language?

[Dynamicdk]

I have a Vag Com 11.11 clone atmega 162, is it possible to update to a newer version, and change language

is there a guide "how to do it"

Please help

[xoom]

I have a Vag Com 11.11 clone atmega 162, is it possible to update to a newer version, and change language

is there a guide "how to do it"

Please help

How many pages do you read back ? I think in 5 pages you will find everything..

[alexm1]

I manage to give some time to test v6.1 loader: is working fine with 18.2.0.

I saw that in v6.1 zip there is only VAGCOM_eewrite lang.exe (not VAGCOM_eewrite.exe as I found in v5), If I understood write: in this moment the last language chosen for writing atmega(via usb) will be the the only that will be with Registered License?
So, we can not use, two languaage's with the same cable as in previous vers? (ex. 14.10.0 )

No matter what will the answer to my questions...
God bless Kolimer (and all user's in the forum).

[BASi77]

Unpacked exe
Can somebody find where is blacklisted Kolimer v5 serial and where the blacklisted serials are checked?

It's great that you succeeded to unpack and decode the original.exe file.
But unfortunately there is such error:

p01.jpg

None of the Kolimer (v1 ... v6) serial numbers are blacklisted up to version 18.2.0

p03.jpg
p05.jpg
p06.jpg

[34260551]

It's great that you succeeded to unpack and decode the original.exe file.
But unfortunately there is such error:

p01.jpg

None of the Kolimer (v1 ... v6) serial numbers are blacklisted up to version 18.2.0

p03.jpg
p05.jpg
p06.jpg

Kolimer v5 FTDI_ID is blacklisted in version 18.1.0-18.2.0

[BASi77]

Kolimer v5 FTDI_ID is blacklisted in version 18.1.0-18.2.0

ATmega serial number is not blacklisted. Simply every new version of the loader under its own eepromavr and ftdi_id.

p09.jpg

[bibkare]

Newest loader 6.1 starts better on XP then v5 and also AV doesn't recognized it as potential threat, excellent work Kolimer, God bless YOU mate.

[xoom]

Newest loader 6.1 starts better on XP then v5

Yep, that was fixed in V6.1

[Dynamicdk]

I have a Vag Com 11.11 clone atmega 162, is it possible to update to a newer version, and change language

is there a guide "how to do it"

Please help

I found V6.1 (Thanks)

I need some help, how do I make 12V when programing my cabel, Do i put it into my car or do I use some pins on the cabel and make 12V power that way

I did read my cabel type, when the cable were connected to my car, and get this: vcds.png

Now I need to program it Progisp, but now I need help...
I did load the Projects, and the what to do..?

[gini80]

you have 12v on the yellow wire from the molex plug from the pc source

[xoom]

Any 12V DC Power supply will work.. just connect:

OBD2 PIN 16 to +12V
OBD2 PIN 4 to GND (minus)

[pkor]

Any 12V DC Power supply will work.. just connect:

OBD2 PIN 16 to +12V
OBD2 PIN 4 to GND (minus)

I get at lot of " Unable to find a .ROD file for:"

will flashing a new fw help. og is it just a poor build off my "china cable" ?IMG_0073.JPG

[alexm1]

Share some pics with the pcb.

[hid3]

What's inside it?
I'd take your case as a gift...