VAG-COM/VCDS EVERYTHING

[AceDuk]

Ok thank you

[Nilll]

Good day, Thanks for the new bootloader. What are the differences from 7.1 .

[kayne30]

I think he asked fot GAL/ATF firmware, not dumps

Maybe someone knows the Vcc pin number on "HEX-V2" programming header? Thanks

Please help me with my hex v2

[Mchele2000]

I would like to say a massive thank you. I managed to reflash a vcds clone up to 18.9 and everything is working perfect. Also thank you to Kolimer for his software. ps i have never done anything like this before so cheers guys.

[danwood76]

A small Xmas present for everyone. Loader v7.2.

https://anonfile.com/K6Edt2n1bb/VCDSLoader_v7.2_zip
https://bayfiles.com/LaE7t2neb3/VCDSLoader_v7.2_zip
https://sendit.cloud/rkjgukdtbi6l
https://dbr.ee/pRvZ
https://www.dropjiffy.com/f/1RZITC1B
https://www.mirrored.to/downlink/IL28B8RH
https://clicknupload.org/yu067zfrpivj
https://userscloud.com/gcffimyjew97
http://uppit.com/ga8fqyx8evq1
https://1fichier.com/?lpqy20bquuhyshpfj1so
http://www.solidfiles.com/d/e88qBjzMaNXZY
https://uptobox.com/mf289uadv7in
https://www37.zippyshare.com/v/2go6ewCD/file.html

Thank you for all your hard work Kolimer.

Your software has revived my brothers old VCDS 12.x.

[snakema]

A small Xmas present for everyone. Loader v7.2.

https://anonfile.com/K6Edt2n1bb/VCDSLoader_v7.2_zip
https://bayfiles.com/LaE7t2neb3/VCDSLoader_v7.2_zip
https://sendit.cloud/rkjgukdtbi6l
https://dbr.ee/pRvZ
https://www.dropjiffy.com/f/1RZITC1B
https://www.mirrored.to/downlink/IL28B8RH
https://clicknupload.org/yu067zfrpivj
https://userscloud.com/gcffimyjew97
http://uppit.com/ga8fqyx8evq1
https://1fichier.com/?lpqy20bquuhyshpfj1so
http://www.solidfiles.com/d/e88qBjzMaNXZY
https://uptobox.com/mf289uadv7in
https://www37.zippyshare.com/v/2go6ewCD/file.html

Thanks you for all your work

[Syrxes]

48404170_303389070280819_76599814011224064_n.jpg2.JPG
Hello, i have this cable i bought 2 or 3 years ago. It is working with software provided by manufacturer, but I can't access stuff like radio, headlight range or save long coding. Is there anything I can do with this cable, or just buy new one?

[Roma77]

48404170_303389070280819_76599814011224064_n.jpg2.JPG
Hello, i have this cable i bought 2 or 3 years ago. It is working with software provided by manufacturer, but I can't access stuff like radio, headlight range or save long coding. Is there anything I can do with this cable, or just buy new one?

just buy a new, NEC-bad.

[Syrxes]

Any advice on where to get new one? I’ve seen a couple sites, but most of them seem sketchy

[hid3]

Obd2CarTool.com is the trusted source here..

[Syrxes]

Obd2CarTool.com is the trusted source here..

Thank you very much for your time.

[chora]

thank you for your good work kolimer

[sahraoui1]

A small Xmas present for everyone. Loader v7.2.

https://anonfile.com/K6Edt2n1bb/VCDSLoader_v7.2_zip
https://bayfiles.com/LaE7t2neb3/VCDSLoader_v7.2_zip
https://sendit.cloud/rkjgukdtbi6l
https://dbr.ee/pRvZ
https://www.dropjiffy.com/f/1RZITC1B
https://www.mirrored.to/downlink/IL28B8RH
https://clicknupload.org/yu067zfrpivj
https://userscloud.com/gcffimyjew97
http://uppit.com/ga8fqyx8evq1
https://1fichier.com/?lpqy20bquuhyshpfj1so
http://www.solidfiles.com/d/e88qBjzMaNXZY
https://uptobox.com/mf289uadv7in
https://www37.zippyshare.com/v/2go6ewCD/file.html

hi , very good job KOLIMER i love you so much
my cable vag 805.1 is now 18.2
thanks

[supermario333333]

Hi @all,


I used for a long time the old 908 dump with my 232BM cable. Now I have read about the loader solution. In the info file it will described to cut the line between STC Pin9 and resistor R50. But on my PCB the Pin9 is connected to a transistor T5. Only Pin8 is connected to resistor R50. Which connection should I cut ?


thx
Mario

[hid3]

If you can, desolder STC completely and be done with that