VAG-COM/VCDS EVERYTHING

[Batch88]

Possible upload this file for update?very thanks

[Batch88]

friend

I sent you a PM
If you have file to update cable with VCIUPDATE
My cable https://ibb.co/rdhWJx8

Possible upload this file for update?very thanks

[jan zrok]

Hi
I bought from here https://www.obd2cartool.com/vip-link...members-p-1209 Option 2/HEX-V2 cable.
I installed VCDS 20.4.2 EN and VCDS 20.4.1 CZ (SVO) on a laptop with Windows 7 Pro 32bit (x86). The cable worked well. Now on this old laptop the charging module has broken and cannot be used. So I installed to the second older laptop with Windows 10 home 64bit (x64) again VCDS 20.4.2 EN and VCDS 20.4.1 CZ (SVO). When I first install on Win 10, Windows defender detected threats in Koliner loader, because is difficult to turn off completely Windows defender. I reinstalled VCDS with completely turn off antivirus. But the cable doesn't work quite well in this laptop with Win 10. The port test is OK for both VCDS (EN and CZ), License Status - Valid / Activated too.
When I want perform SRI reset in my Passat B5 failure message is displayed. When I confirm this failure message with the OK button the service is set up and saved successfully.
I have two questions.
1 - You don´t know why this is displayed failure message?
2 - When starting VCDS 20.4.2 EN with Kolimer loader v9.2 in a blue box I see x64 v9.2
When starting VCDS 20.4.1 CZ (SVO) with Kolimer loader v9.2 in a blue box I see x86 v9.2
It is good that the loader is starting x86 (32bit) when running on Windows 10 64bit system?
Thank you for answer

test port vcds en https://ibb.co/X8dyqBK
test port vcds cz https://ibb.co/0np4BTV
SRI Reset vcds en https://ibb.co/KVtRk2T
SRI Reset en OK https://ibb.co/9W9Jbgn
SRI Reset vcds cz https://ibb.co/VJB9XFZ
SRI Reset cz OK https://ibb.co/tK6yBj6
start vcds en https://ibb.co/zSPbsCy
start vcds cz https://ibb.co/0ZZCzHC

[Fabio89]

Possible upload this file for update?very thanks

I dont have the file too

[liviudiaconu]

Hi
[...] Windows 10 home 64bit (x64) again VCDS 20.4.2 EN and VCDS 20.4.1 CZ (SVO). When I first install on Win 10, Windows defender detected threats in Koliner loader, because is difficult to turn off completely Windows defender. I reinstalled VCDS with completely turn off antivirus.[...]

Put exceptions in WinDefender for both VCDS.exe.
After this see TREATS in Win Defender. A part of Loader is extracted in another location on HDD and is treat as virus. Ot treated job put exception too and will work

Tip: When launch KoliLdr in Left-Down corner (South-West) of Loader screen must write OK. If not, loader not loaded correctly.
For that users who moded loader for no splash screen..not appear that "OK" i speak

[Batch88]

I dont have the file too

Thanks,but have found a solution for update this cable? thanks

[ocostel]

Hi mates.

Do you have solution for License revoked ? I used VCDS 19.6.1 , 19.6.2 and 20.4.1 with Kolimer loader 9.2 and after a while the license will be revoked.

[pirate222]

IMG_20200919_091814[1].jpgIMG_20200919_091845[1].jpgI bought this cable a while back but the hard drive crashed on the laptop that had the software and the loader. Can someone look at the pictures and tell me which software and steps to take to use it on a 2004 VW. Thanks in advance for any help you can give me. P.S. My current laptop runs Windows 7.

[kaalis]

And again, new @%@^T@^ released yesterday for MFT, HGJ, ROJ, DRV, PCI and AIB
PRI also got updated.

[j8y]

IMG_5033.JPGIMG_5015.JPGIMG_5018.JPGIMG_5022.JPGHi guys I’ve got what I bought and was advertised as a hex v2 cable. I need it to work with 2020 cars. When I plug into and use the interface vcds reports it as a hex-usb interface not v2.

Can I update? I’ll attach pics that might help

[j8y]

9549888D-0B34-4251-A0A6-002EF2AACC50.jpgDB783D04-73D8-4B75-B714-D0AD718976A4.jpg

[hrag]

hi frend I have problem after update my vcds can help please ...

[jan4]

@ hrag

which cable ?
which update ?

[jan4]

@ j8y

NO........!!

[turboleak]

what is the latest version of Kolimer loader?