You can use any of these parts : AZ1117IH-5.0TRG1 ; SPX1117M3-L-5-0 ; NCV1117ST50T3G ; AZ1117H-5.0TRG1 ; MIC39100-5.0WS or LT1117IST-5#PBF . Some of them cheaper and better then the presented part number from user fly
Answering these:
This was just my initial guess that regulator may be defective or incorrectly marked.
There may be other reasons, including but not limited to:
1) mistake when printing PCB
2) shorted capacitor(s) somewhere in the circuit
3) incorrect resistor value (too low)
I'd say there is high chance that the rest of Billyym's cables might burn the same way unless real root caus eis investigated.
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
You can use any of these parts : AZ1117IH-5.0TRG1 ; SPX1117M3-L-5-0 ; NCV1117ST50T3G ; AZ1117H-5.0TRG1 ; MIC39100-5.0WS or LT1117IST-5#PBF . Some of them cheaper and better then the presented part number from user fly
If you like my post and it helped you please press THANKS.
bg17aw (10th April, 2021), hid3 (7th April, 2021), jan4 (8th April, 2021), liviudiaconu (8th April, 2021), peetr (10th April, 2021), PierreTheron (9th February, 2022), seal777 (8th April, 2021), Tomas003 (7th April, 2021)
Not so easy. 1117 haven't the same pinout
2920A have the same pinout like 7805, b.e.
Last edited by liviudiaconu; 8th April, 2021 at 09:12 AM.
Yes I managed to get replacement cables.
However, do you know when the new ViiLoader is out?
As the Current loader does not work with 21.3
Thank you.
Not working vcds 21.3 autoscan my car Tiguan 2018 year
so witch VIP Loader is the way to go for now that works all fine with the latest version of VCDS?
For me fine too. Already tried with various car models from 2013 (MQB) until 2017 (Audi MLB).
CB 0.4545.4
It sounds really strange that not everyone suffers from this issue. Guys, could you please share the links where did you buy these cables? Honestly, i don't believe that there are any differences in cables from China, but who knows...
Tomgnus (12th April, 2021)
please use the latest ross-tech software and vii plus loader
Tomgnus (12th April, 2021)
For me fine too with 08.021.05 + Arteon 2019
Last edited by Tomas003; 11th April, 2021 at 12:32 PM.
I have STM32405 hex-v2, for unknown reason when I started VIIplus loader to load french 21.3 or any other it is locked and show illegal device
anyone found a solution ? any idea to flash with VCIUPDATE? who has this app please send it to make a try
thanks illegal device.jpg
Bookmarks