VAG-COM/VCDS EVERYTHING

[MichaelKors]

@XTR Your keeplinks is an embarressment. Why do you use that crap ?

Free, without password, VIIPlusLoader 08.022.02

https://mega.nz/file/NFMVEaBY#gXz-9x...iAEsIwjoL_FadM

[subzdarg]

FYI: the new VIIPlusLoader 08.022.02 has been released as beta.
Download @ BIGGEST VCDS & VAG-COM COLLECTION EVER!!! UP TO 22.3.0!!! INCL. LOADER!!!

but your links are a nightmare why all the add crap an phishing new loader is worst on english version

[mu95f]

Hello Guys
I have a big problem with my VCDS Hex-can clone Atmega 162 based.
The "Test" is correct, the interface is connect, but i have the
License Status: Revoked
I have tried with different versions of VCDS but the problem remains.
I was using the loader ver 1.15.1, now I have tried with the loader 9.2 but I have not solved the problem.
I tried to flash the eeprom in another language, same problem.
I have experience for flashing the interface.
Can you give me some advice to restore.
Greetings

[ncksp10]

Tks .....................

[ncksp10]

IDK if it's related but i tried this BETA with 22.3 and i wasn't able to enter security access codes, the cable would kind of fail and stop working completely, unplugging from both pc and car makes it work again, but security access always breaks it. i rolled-back to 21.9 and V08.021.13 and everything works fine again. i always start from the viiplus software.

New V08.022.02 (BETA) ....Here it is still in the same situation, 22.3 giving problems when we put the security codes, is yours still like this too?

[jaselvd]

New V08.022.02 (BETA) ....Here it is still in the same situation, 22.3 giving problems when we put the security codes, is yours still like this too?

Yeah, exactly the same, VCDS locks and cable kind of crashes and it wont work again until i fully disconnect the cable.

[MichaelKors]

Mine is working just fine.
But, i installed VCDS with internet off and imediatly blocked internet access in firewall.
i’m using it almost every day without problems.

I done the exact same thing with the old loader and i was ocassionaly getting License Revoked.

[kaalis]

Tried vcds new 22.3.1 with 9.2 loader, so far so good. Labels and UDS_EV update i suppose, compared to 22.3.0

[whiteraven]

Hi all, i need your help I am newbie here..
I have VAG171 cable - inside is assembled Atmega162 + ATF16v88 + FTDI 1703-C
can you please point me to correct hexdumps for this HW?

[networkers]

can you please point me to correct hexdumps for this HW?

All you need can be found in kolimer VCDSLoader_v9.2 archive. Hardware should be HW_0x44.

[Kapten]

IMG_2943 (Medium).jpg

kolimer loader v2 vcds 20.12

why do i get this error ? is cable going bad? tested on 2018 and 2011 same error

Internal ROD error:

[aivs]

Hi, I'm looking for a vcds with c-sniffer.
I'm currently using vcds 19.6.0 and I have a problem. When I try to enter 17 dashboard block (UDS), vcds crashes. No problem with other blocks (1 engine, 2 transmisstion CAN protocol).
Who is the developer of the c-sniffer utility? What versions of vcds does it work with?

[inhosik]

VIIPlusLoader-08.022.04-FULL-Installer

https://mega.nz/file/DhdlgYxa#wcnePu...tboj5kgqIRi1x8

[Pater Fortunato]

Tested 08.022.04 and have a lot of bug's with 22.3.1 EN - sometimes licence revoked, interface not found, and the big big issue it's on Engine - Security Acces - 27971 - it is not working... (on the same car with the same software 22.3.1 EN but with Atmega162 interface it is working perfect)...the problem it is from VII PLus Loader. Also Tested with 21.9.0 ROJ sometimes licence revoked, sometimes interface nor found but the security acces on engine IT IS WORKING.
The last VII Plus Loader who work well foe me it is 08.021.13 with 21.9.0 EN and 21.9.0 ROJ.
PS. The Test Car It Is SKODA FABIA 2014 1.6TDI

[jan4]

I would like to see a response from our beloved FLY .

Maybe he can clarify why it is not working as it is supposed to be .........