VAG-COM/VCDS EVERYTHING

[apoldeus]

bt03.jpg

Can anyone point the ST-link pinout for this and boot jumper.

[a1pp4]

Hey, can somebody tell me few things, is there working clone cable for vw year 1996 to like 2010, i saw there is couple different atmega cables and one with stm32f415. What is difference of atmega and stm32f415? Can someone post me picture whats best of those.. also is there working software for those cables?

If someone knows link to aliexpress seller would be nice

Edit: well i did order from obd2cartool this one:
https://www.obd2cartool.com/index.php?main_page=product_info&products_id=1263& page=9

Hope i made good decision 🙄

[badrax]

bt03.jpg

Can anyone point the ST-link pinout for this and boot jumper.

I don't think the debug interface are exposed on this PCB version.
You can test these two pins on the STM:
PIN 72: SWDIO
PIN 76: SWCLK
And see if you can find them on the pin header.
Oh and the boot pin is:
PIN 94: Boot0

The STM will most likely be locked to RDP1 so you will only be able to read out the RAM content.

[apoldeus]

I don't think the debug interface are exposed on this PCB version.
You can test these two pins on the STM:
PIN 72: SWDIO
PIN 76: SWCLK
And see if you can find them on the pin header.
Oh and the boot pin is:
PIN 94: Boot0

The STM will most likely be locked to RDP1 so you will only be able to read out the RAM content.

Hi
there is debug connector exposed but partialy under usb
just flashed this fake clone to have a full PCan FD usb
pcan_usb_fd.jpg
debug.jpg

binary here https://www.rusefi.com/forum/viewtopic.php?f=13&t=2243

github https://github.com/moonglow/pcan_pro_x

happy modding

[mahadeva]

is viIPlusLoader 08.022.09.005 working with STM32F405 Danish v22.10.00 ?
Thanks

tested .. it,s working

[tutzu]

happy new year,
please if someone can tell me what part number is VR2
Thanks !

[Marian89]

Maybe TPS73533DRBR

[pepeEL]

Hi. I have version 21.3 and i try coding my module AFS 5M0907357D. But when i go to this module VCDS no show me information about option coding. Show me my coding but i dont know what is what. Is any chance solution to get help of coding to this module ?

[pepeEL]

IMG20230102184141.jpgIMG20230102184201.jpgHi. I have not use this cable. Is any chance to get to live it and update it to latest version ? I dont know what is a chipset because China people clear all on chip.

[jan4]

looks like nec processor ? anyone ??

i remember someone posted a 19.6 update for this processor ............maybe that can help our op ?

[pepeEL]

looks like nec processor ? anyone ??

But good inteface which i buy from aliexpress is which ? What model chip? TO get VCDS in latest version working. With ATMEGA i have but no full working with some codding.

[pepeEL]

looks like nec processor ? anyone ??

i remember someone posted a 19.6 update for this processor ............maybe that can help our op ?

But where is this update ? Can you give me a link ?

[jan4]

empty your mailbox it is full

[pepeEL]

Done done

[Mnaoufal]

Hello everyone,

Today i came up with a new cluster and since my car (Seat Cordoba 1.9 SDI 2004) have immo, i downloaded most common used vag versions (vag eeprom 1.19/120 , vag tacho, vag k+can...)
vcds is working without any problem it can read my car but the problem is vag programs doesn't find my car and shows either no ECU found or no device found.
I'm using Win10 64bit.
And China Hex-V2 cable (FT232RQ CHIP).

What do I need to do, any help please?