VAG-COM/VCDS EVERYTHING

**mattydr67** · 19th November, 2010, 12:07 PM

Originally Posted by angelx431

311.2-Vietnamese!!!!!!!!! Vietnamese

Good I have it.
Do you want it?
Good luck

**bibkare** · 19th November, 2010, 12:29 PM

Originally Posted by hevi

the problem is just when i disconect cable from car/laptop.
if i connect it again gives device not recon, but if i connect that same "bad"cable to another laptop it is recon as ross.
the first laptop just recon cable after format and install windows xp.
strange isnt it?
Dump i use is from here

Check eeprom 93c46 maybe you need to replace it, also you need to check is there a power surge on usb port or you have some short connections on pcb

**hevi** · 19th November, 2010, 03:41 PM

Originally Posted by mattydr67

For what version?
908?
Good luck

Yes 908
thank you

**hevi** · 19th November, 2010, 03:47 PM

Originally Posted by bibkare

Check eeprom 93c46 maybe you need to replace it, also you need to check is there a power surge on usb port or you have some short connections on pcb

Checked all connections with a magnifier and all seems ok.

Now the most strange...today connected again cable to laptop and is ross

i think cable has something that charges and discharges after sometime

**tubro_99** · 20th November, 2010, 09:55 AM

What logic is inside the ATF16V8?

Did anyone have the jedec file for this part, or a schematic of the logic?

**prusony** · 20th November, 2010, 12:05 PM

Originally Posted by tubro_99

What logic is inside the ATF16V8?

Did anyone have the jedec file for this part, or a schematic of the logic?

Tested with VagCom 908 !

**del635** · 20th November, 2010, 02:34 PM

Is there a working cracked 311 or 409 existing? I got 3 now with various bugs.

**med79** · 20th November, 2010, 07:58 PM

someone make one video of programing of vagcom 908

**mattydr67** · 20th November, 2010, 08:21 PM

Originally Posted by del635

Is there a working cracked 311 or 409 existing? I got 3 now with various bugs.

"Was long time ago in this forum"
I suppose that ou know that I cannot share item here.
Good luck

**beli123** · 21st November, 2010, 08:08 PM

Hi there. Can anyone tell me what do you program in 93c46 and in GAL16v8B i mean what file? if anyone has it can post it?

**bibkare** · 22nd November, 2010, 10:06 AM

Originally Posted by beli123

Hi there. Can anyone tell me what do you program in 93c46 and in GAL16v8B i mean what file? if anyone has it can post it?

For 93c46 use mprog and .ept file as it's external eeprom memory "holder" for ftdi 232bl, for gal use attached jedec file

**wejet** · 26th November, 2010, 09:23 AM

Hello
Does anyone can kindly provide eeprom atmega162 VCDS805 or VCDS908 PL version?

**samiko** · 26th November, 2010, 06:01 PM

hello
Can someone help me I have built dump ATmega according to the original cable RossTech FT232R dump but only works in version 704.1 in future versions of 805 and 106.1 does not work. I tried to FT232BL HW, someone knows a way how to use hardware for proper operation.

thanks for help

**bibkare** · 26th November, 2010, 06:47 PM

Originally Posted by samiko

hello
Can someone help me I have built dump ATmega according to the original cable RossTech FT232R dump but only works in version 704.1 in future versions of 805 and 106.1 does not work. I tried to FT232BL HW, someone knows a way how to use hardware for proper operation.

thanks for help

If i understood correctly you built dump for atmega by copying content from original vcds interface with ftdi 232rl, can you explain what exactly did you do and how you made that dump or all this is one big crock of s...