turboleak (7th August, 2020)
turboleak
Here you have the vcd$ 11.11.3 version.
https://ulozto.net/hledej?q=vcds%201...798.1596784911
Last edited by Mario6; 7th August, 2020 at 03:04 PM.
turboleak (7th August, 2020)
Yes, I think it will be if you do update. Disassemble the interface casing and check what PCB you have. (Atmega 162 or ARM)
Upload PCB pictures .
Maybe someone can advise you more.
turboleak (9th August, 2020)
[QUOTE = Lemme345; 3925090] ACTUALIZAR !!!!!
Jan4 vino al rescate ... No fue suficiente para flashear el cable recién conectado a la PC y al automóvil. Es extraño, pero tenía que estar conectado a una fuente de alimentación de 12V separada, en lugar de la de 12V del automóvil. Entonces parpadearía y ahora funciona en VCDS 20.4.1.
************************************************ ***********
Hola de nuevo.
Parece que me vendría bien un poco de ayuda de sus muchachos ...
Acabo de recibir este cable hoy, después de 7 meses de espera ...: http: // www. obd2cartool.com/atmega-vag-hexv2-vag-1781-usb-interface-vcds-hex-v2-full-actived-free-shipping-p-1554
En el momento del pedido fue con VCDS 19.6.1. Venía con un pequeño CD-Rom con el software, pero no tengo una unidad, así que trato de que funcione de todos modos. De acuerdo con la documentación, debe venir con un gestor de arranque y estar listo para actualizar. Esto es lo que he hecho hasta ahora:
Descargué VCDS Release 20.4 de Ross-tech
Descargué VCDSLoader_v9.2.zip de Kolima
instalado VCDS Release 20.4 Conecté
el cable al automóvil y a la PC
Ejecute VAGCOM_HWType.exe para confirmar la conexión. Estaba bien: se informó FW 1.96 / HW 0x46 / solo en inglés / Bootloader Enabled
Copió VCDSLoader.exe en el directorio instalado y creó el enlace.
Ejecute VCDSLoader.exe (cambió su nombre a VCDS.exeL como debería)
Aquí está el problema ... Inicio VCDS, y dice 'Primer uso / No se encontró archivo de configuración'. Luego entro en 'Opciones' y presiono 'Prueba'. Pero viene con 'Interface: Not Found!'.
Luego intenté flashear EEPROM usando VAGCOM_EEWriteLang.exe, y usando solo el idioma inglés. Comienza a parpadear, pero se detiene con el error 'Error al actualizar el firmware personalizado'.
Cualquier idea de cómo puedo hacer que esto funcione sería genial.
Br
Lemme [/ QUOTE]
hello friend, when using the VAGCOM REWrite Lang.exe you must feed the interface to a 12v power supply, (pin 4 and 5 ground) (pin 16 positive 12v). regards
kamaleon (31st March, 2022), Rebello Brian (13th August, 2020)
Good Morning all.
I have a Chinese clone vag cable which works great on older models (2010 and below) but doesn't work on newer ones, so I was wondering if this cable can be updated to work with newer cars please?
Below are my pcb photos (front and back), please if someone can help me update the firmware.
Thank you all and god bless
IMG_3668.JPG
IMG_9254.JPG
Last edited by Yumraaj; 9th August, 2020 at 08:32 AM. Reason: spelling
Hi,
yes, your câble can be updated. Use kolimer package.
If bootloader is disable, you need to use an USBsap external programmer (less than 10$ on AliExpress)
to be sure, use HWtype.exe (inclued in kolimer’s package) to check if bootloader is enable or not
kamaleon (31st March, 2022), Rebello Brian (13th August, 2020)
friend
I sent you a PM
If you have file to update cable with VCIUPDATE
My cable https://ibb.co/rdhWJx8
Last edited by Fabio89; 13th August, 2020 at 04:48 PM.
Please any help will be appreciated, trying to flash i've got (invalid bootloader)
1.jpg
Last edited by squier; 14th August, 2020 at 02:14 AM.
I have a HEX v2 with arm processor with VCDS 20.4.1. In the new version 20.4.2 - firmware update is required but if you try to do it " your firmware is up to date " is the meaasge i get. So HEX v2 can not recive the new fw tha tis required for 20.4.2 EN
In this case try to update more times, sometimes it helps and at the 2nd or 3rd time it can finish the process successfully.
If not, then flash it with the "old" method. For this you will need:
- USBasp / USBisp
- Jumper cables (6 pcs of Female-Female)
- ProgISP 1.72
- Cable conent
FRM 20.4.2 released
Tib82 (16th August, 2020)
Bookmarks