VAG-COM/VCDS EVERYTHING

[brmservice]

I have some issues using VIIPlusLoader (08.21.05) and 21.3.0. sometimes I have revoked licence status. if I close and reopen the programm it turns to valid licence , etc.


the laptop was never connected to internet when using vcds. I have no antivirus , loader and vcds were installed and runned under admin rights.



hardware is this one:

[DudePT]

Screenshot_2021-07-01-19-09-26-619_com.whatsapp.jpghi, i got This old cable chipIMG-20210701-WA0013.jpgAtmega 162 , use VCDs 11.11 is any way to update firmware to use a new version of vcds?

[miouser]

@DudePT

use https://www.digital-kaos.co.uk/forum...=1#post3639906

[DudePT]

stm32f405vgt6

@DudePT
U Say for i Use the loader to use VCDs 19.6?

use https://www.digital-kaos.co.uk/forum...=1#post3639906

[flyfvdi]

I have some issues using VIIPlusLoader (08.21.05) and 21.3.0. sometimes I have revoked licence status. if I close and reopen the programm it turns to valid licence , etc.


the laptop was never connected to internet when using vcds. I have no antivirus , loader and vcds were installed and runned under admin rights.



hardware is this one:

Please contact fly company technical support engineer for help.

[isavrseno]

i have one burned hex v2 with stm32f405vgt6
burned parts:

2920A 5.0WS

DADU 1623

CVY 064D

STM32F405VGT6

i replaced both burned voltage regulators and can transceiver but stm32f405 is dead too (vcc and gnd shorted)
if i buy new stm32f405 and replace it how to flash it with firmware? need to have firmware and flash it with programmer or it is possible to restore firmware with usb cable only?

[flyfvdi]

i have one burned hex v2 with stm32f405vgt6
burned parts:

2920A 5.0WS

DADU 1623

CVY 064D

STM32F405VGT6

i replaced both burned voltage regulators and can transceiver but stm32f405 is dead too (vcc and gnd shorted)
if i buy new stm32f405 and replace it how to flash it with firmware? need to have firmware and flash it with programmer or it is possible to restore firmware with usb cable only?

return back to factory for repairing

[isavrseno]

i dont want to return to factory i asked is it possible to fix it with programmer or usb cable if i replace mcu with new

[flyfvdi]

i dont want to return to factory i asked is it possible to fix it with programmer or usb cable if i replace mcu with new

sorry， no， cannot

[and1]

I was using a HEX CAN V1 with the latest 21.03 and also got the license revoked. It was working like a charm before with the Loader V9.2.

What can I do now?

[Tomgnus]

I was using a HEX CAN V1 with the latest 21.03 and also got the license revoked. It was working like a charm before with the Loader V9.2.

What can I do now?

reflahs the cable and it shall go form revoked to valid again i wuld recommend go down to a lower version of vcds

[zoki21]

hello, can this new vcds with stm 405 work on older programs from 21.3.0

[flyfvdi]

hello, can this new vcds with stm 405 work on older programs from 21.3.0

VCDS Hex-V2 with main chip STM32F405VGT6 and VII PLus Loader works on older programs from 21.3.0

[episcop]

Hi friends. Have HEX with atmega 162 sw 1.96, work fine with 17.8.1 and loader. But 19.6.1 and 9.2 loader from Kolimer, don"t recognize adapter on some computer. Any solutions? Need flash adapter, or other soft?

[jan4]

vcds béta and hexV2 , anyone ??