Yes, the new Version works with the 9.2 Loader
Yes, the new Version works with the 9.2 Loader
FoxMulder (20th May, 2020)
Yes, version 2.4.1 works with Loader v9.2
FoxMulder (20th May, 2020)
New Hungarian version is released:
VCDS 20.4.1 HGJ (20200518 DS317.0)
SHA1: cf4046e52489fe12e42971aec3d6b347842b8c96
Andeboy (20th May, 2020)
Hello,
VCDS-ROJ-20041 is now online
liviudiaconu (21st May, 2020)
Is ther a new loader 9.2 or do we need to use the old 9.2
Greetings everyone!
I have this HW 0x46 type pcb, the GAL chip is not connected to atmega. I use 9.2 loader.
The problem I'm having is connection related. I write the flash, eeprom, fusebits and lockbits by usbASP, write FTDI eeprom by Mprog and after that I use the EEWriteLang successfully.
I hook the cable up to a car, start VCDS test, everything OK, but after/during an auto-scan the cable disconnects. It works for about 5 minutes then VCDS freezes and the HWType says Interface not found.
The Device Manager shows the cable as Ross-Tech device but it has a small yellow exclamation mark, stating that something is not working right.
After rewriting everything again, it works but only for a small amount of time...
I'm guessing the FTDI chip is cooked or something, what are your thoughts people?
Thanks in advance!
PS: the usb cable is desoldered now
IMG_8214.JPGIMG_8215.JPGIMG_8216.JPGIMG_8218.JPGIMG_8219.JPG
Need 19.6.1 EN Please
Hi everyone, im looking for some help please.
I have a hex v2 clone, when plugged into the laptop both red leds light up, the bootloader is disabled and i cant find away to solve this, see IMG_20200523_233700.jpgIMG_20200523_233723.jpg
read your pm
Hi...
In this link ..you have the version 19.6.2 in English
http://cn.ross-tech.com/download/136...-Installer.exe
and in this link you have the Loader
https://www.sendspace.com/file/zu0ws7
sorry for my English....
Thanks
That's hex v2 fake. Not even close to clone.
https://filebin.net/uwixe0he4qgbehvz (link will expire in 1 week)
Hi, I have an ORIGINAL (but like 10 years old) HEX CAN interface that is not working after being used with a hacked vcds software
VAGCOM_HWType.exe is not working ("No response"). Is it because PID is FA20 and not FA24?
ctest.exe is not working but displays 2 lines as per picture. Better quality images here: https://imgur.com/a/tFpmjDK
Can I use VAGCOM_EEWriteLang.exe to try and solve this one?
Last edited by bg17aw; 26th May, 2020 at 02:14 PM.
Bookmarks