@flyfvdi, you have not explained why does your listing has no description. I also see that you have increased its price to 100$. In my opinion, it no longer makes any sense to pay that much for a clone. Seeing the quality of components used, soldering quality and increased price, I guess I should consider the original cable instead. Given that we do not pay for IP (that belongs to Ross-Tech), how does it cost that much remains a mystery to me.
@fiaduu should i replace MIC2920A, if yes what is recommended, that not get burned...
Sent from my SM-G970F using Tapatalk
Waiting for fly to answer our questions ..........
can not buy MIC2920A-5.0WS, SOT223, so we use XL4001E1, SOP8,
can not buy TJA1050T,SOP8 , so we use SIT1050T, SOP8,
can not buy L9637D, SOP8, so we use DP9241 SOP8,
if we can not buy STM32F405VGT6, QFP100 , so no any fly vcds hex-v2 to sell,
now we already do not have STM32F405VGT6, QFP100, so we already do not have fly vcds hex-v2 to sell,
when we can buy STM32F405VGT6, QFP100 again, we do not know.
If you can buy original MIC2920A-5.0WS, SOT223, it support to 26V, it is ok.
MIC2920A-5.0WS.jpg
we just have 611 PCS original MIC2920A-5.0WS, SOT223 in my hand.
Last edited by flyfvdi; 12th June, 2021 at 09:06 AM.
this one from https://www.tme.eu/en/details/mic292...rochip-micrel/ should be ok? operating voltage 2-26V.
Sent from my SM-G970F using Tapatalk
How to update atmega interface? I have one HEX-V2. Originally supposed to work with 19.6.1, recently I've downloaded 21.3.0 with kolimer 9.2 and it's running. In Settings it shows that SW version is 1.96. Will it work as 21.3.0 now, with latest kolimer? Or what should I do now?
I would replace it with a genuine one from the trusted seller if you can find it in stock. You can also look for alternatives by doing a parametric search on DigiKey and similar websites. For example, these look like good replacements, but they are not cheap: MIC5239-5.0YS, LT1129CST-5.
to upgrade thix cable just ith VIIPlusLoader ?
Last edited by DudePT; 16th June, 2021 at 07:21 PM.
Interesting that MK5 still uses K line to connect engine. Could it be the reason?
Bookmarks