VAG-COM/VCDS EVERYTHING

[Mario6]

turboleak

Here you have the vcd$ 11.11.3 version.

https://ulozto.net/hledej?q=vcds%201...798.1596784911

[turboleak]

Here you have the vcd$ 11.11.3 version.

https://ulozto.net/hledej?q=vcds%201...798.1596784911

Thanks man! it worked. Now the problem is that the car is from 2014 and the software version is too old. damm... One of the 11.11.3 versions offered to upgrade the firmware from 1.84 to 1.91. I'm sure this will kill the cable right?

[Mario6]

Yes, I think it will be if you do update. Disassemble the interface casing and check what PCB you have. (Atmega 162 or ARM)
Upload PCB pictures .
Maybe someone can advise you more.

[LEO7490]

[QUOTE = Lemme345; 3925090] ACTUALIZAR !!!!!
Jan4 vino al rescate ... No fue suficiente para flashear el cable recién conectado a la PC y al automóvil. Es extraño, pero tenía que estar conectado a una fuente de alimentación de 12V separada, en lugar de la de 12V del automóvil. Entonces parpadearía y ahora funciona en VCDS 20.4.1.


************************************************ ***********
Hola de nuevo.
Parece que me vendría bien un poco de ayuda de sus muchachos ...
Acabo de recibir este cable hoy, después de 7 meses de espera ...: http: // www. obd2cartool.com/atmega-vag-hexv2-vag-1781-usb-interface-vcds-hex-v2-full-actived-free-shipping-p-1554
En el momento del pedido fue con VCDS 19.6.1. Venía con un pequeño CD-Rom con el software, pero no tengo una unidad, así que trato de que funcione de todos modos. De acuerdo con la documentación, debe venir con un gestor de arranque y estar listo para actualizar. Esto es lo que he hecho hasta ahora:

Descargué VCDS Release 20.4 de Ross-tech
Descargué VCDSLoader_v9.2.zip de Kolima
instalado VCDS Release 20.4 Conecté
el cable al automóvil y a la PC
Ejecute VAGCOM_HWType.exe para confirmar la conexión. Estaba bien: se informó FW 1.96 / HW 0x46 / solo en inglés / Bootloader Enabled
Copió VCDSLoader.exe en el directorio instalado y creó el enlace.
Ejecute VCDSLoader.exe (cambió su nombre a VCDS.exeL como debería)

Aquí está el problema ... Inicio VCDS, y dice 'Primer uso / No se encontró archivo de configuración'. Luego entro en 'Opciones' y presiono 'Prueba'. Pero viene con 'Interface: Not Found!'.

Luego intenté flashear EEPROM usando VAGCOM_EEWriteLang.exe, y usando solo el idioma inglés. Comienza a parpadear, pero se detiene con el error 'Error al actualizar el firmware personalizado'.

Cualquier idea de cómo puedo hacer que esto funcione sería genial.

Br
Lemme [/ QUOTE]


hello friend, when using the VAGCOM REWrite Lang.exe you must feed the interface to a 12v power supply, (pin 4 and 5 ground) (pin 16 positive 12v). regards

[Yumraaj]

Good Morning all.

I have a Chinese clone vag cable which works great on older models (2010 and below) but doesn't work on newer ones, so I was wondering if this cable can be updated to work with newer cars please?
Below are my pcb photos (front and back), please if someone can help me update the firmware.

Thank you all and god bless
IMG_3668.JPG
IMG_9254.JPG

[ZIPPO4594]

Hi,
yes, your câble can be updated. Use kolimer package.
If bootloader is disable, you need to use an USBsap external programmer (less than 10$ on AliExpress)
to be sure, use HWtype.exe (inclued in kolimer’s package) to check if bootloader is enable or not

[Defon]

VCDS 20.4.2 ENG released

Apparently working with VCDSLoader 9.2 Attachment 734616 (interface was not plugged into car)

real hex-v2 clone doesnt working with 20.4.2 Attachment 734619

Can u tell me where i can get real v2 clone? Heres so many interfaces only with v2 shell...dunno how to know its real v2 inside or just shell...

[jakuza]

where to download?
on https://ross-tech.de/downloads - Softwarestand: 15.05.2020 / Datenstand: 18.05.2020
???

Did you try to download it?
I just did and it is digitally signed on 9th July 2020 so it is obviously wrong info on site only.

[KayLastOS]

files sent with arm clone using rt download directly not sure what these are for thb maybe someone knows i have tools to try dump fw if needed if possible very happy with it lets see if the new rt update blocks them tho but at the moment if i test online all is good

file link https://mega.nz/file/sgNwQSZC#5mVWO0...4lVPPAw16t3noo

video https://mega.nz/file/cxMwjAaB#VzoysS...WpNkfFIXBXfNio

can you upload it again? thanks

[Fabio89]

files sent with arm clone using rt download directly not sure what these are for thb maybe someone knows i have tools to try dump fw if needed if possible very happy with it lets see if the new rt update blocks them tho but at the moment if i test online all is good

file link https://mega.nz/file/sgNwQSZC#5mVWO0...4lVPPAw16t3noo

video https://mega.nz/file/cxMwjAaB#VzoysS...WpNkfFIXBXfNio

friend

I sent you a PM
If you have file to update cable with VCIUPDATE
My cable https://ibb.co/rdhWJx8

[squier]

Please any help will be appreciated, trying to flash i've got (invalid bootloader)

1.jpg

[ovi730]

I have a HEX v2 with arm processor with VCDS 20.4.1. In the new version 20.4.2 - firmware update is required but if you try to do it " your firmware is up to date " is the meaasge i get. So HEX v2 can not recive the new fw tha tis required for 20.4.2 EN

[Tib82]

Please any help will be appreciated, trying to flash i've got (invalid bootloader)

In this case try to update more times, sometimes it helps and at the 2nd or 3rd time it can finish the process successfully.
If not, then flash it with the "old" method. For this you will need:
- USBasp / USBisp
- Jumper cables (6 pcs of Female-Female)
- ProgISP 1.72
- Cable conent

[kaalis]

FRM 20.4.2 released

[ZIPPO4594]

FRM 20.4.2 released

Works fine with vcdsloader 9.2 !