VAG-COM/VCDS EVERYTHING

**vyger** · 13th June, 2011, 06:40 PM

Originally Posted by bat21

search tutorial unpacking pcguard 5.x

Is this tutorial?

**oep** · 13th June, 2011, 06:48 PM

From a base thread of helping to repair some hw we came to a stage the cracking!?

Lesson no1 cracking:
Run.......click..... done...

easy..

**liviudiaconu** · 14th June, 2011, 09:25 AM

Originally Posted by Tereksaz

it is only one variant = for old cable with FT232BM\BL =bootloader with 256 word = start addres to hex - 00003E00
for FT232RL - need another bootloader (with 512 word =start addres to hex - 00003C00 and another fw184_flash Atmega 162.
==========
Tereks

In this case for 512 word Bootsz... must have another values/settings.. right?

**Tereksaz** · 14th June, 2011, 10:33 AM

Originally Posted by liviudiaconu

In this case for 512 word Bootsz... must have another values/settings.. right?

SEE to pfoto
Terekaz

**liviudiaconu** · 14th June, 2011, 10:57 AM

OK, thank's, i'll calculate for eXtreme Burner and/or PonyProg (In Pony it mean Bootsz1 enabled, Bootsz0 disabled for RL, for BM/BL is Bootsz0 enabled, Bootsz1 disabled)..

But, i have the 1.84 from Rutraker, is for BM.. for BL exist another 1.84FW?

**Sarkan** · 14th June, 2011, 11:57 AM

If someone has software for VCDS 10.63 EN, made in China.I would be very grateful to him.
I've been looking at this forum but to no success.

**Igor1973** · 14th June, 2011, 01:44 PM

Originally Posted by liviudiaconu

But, i have the 1.84 from Rutraker, is for BM.. for BL exist another 1.84FW?

For BM or BL firmware is same and it can find on this forum or on rutracker.org For RL exist another firmware and I have not seen it free in Internet...

**cosmind** · 14th June, 2011, 01:46 PM

you can make a loader that works with 1.84 firmware and RL

**Igor1973** · 14th June, 2011, 02:00 PM

you can make a loader that works with 1.84 firmware and RL

Have you a positive experience with this?

**liviudiaconu** · 14th June, 2011, 02:03 PM

Originally Posted by Igor1973

For BM or BL firmware is same and it can find on this forum or on rutracker.org For RL exist another firmware and I have not seen it free in Internet...

Mea culpa!! or.. my finger..
The question was for RL.... BM and BL are different only of leaded or not leaded pins..

**JetSet59** · 14th June, 2011, 05:17 PM

Originally Posted by bat21

OllyDbg to find the snippet of code that you already know from 1063 and find such in 1064

Where is this Snippet code, i have no see it here ?

**pacomasi** · 15th June, 2011, 08:27 AM

hello dump the vcds in spanish?
Thank you

**LittleTOXA** · 15th June, 2011, 09:52 AM

Guys, anybody knows how could we buy source codes for the VCDS to localize it without any bugs/fixes/updates/patches, just using original program code?

Thanks a lot in advance!

**Igor1973** · 15th June, 2011, 10:29 AM

Originally Posted by LittleTOXA

Guys, anybody knows how could we buy source codes for the VCDS to localize it without any bugs/fixes/updates/patches, just using original program code?

Thanks a lot in advance!

Is it joke? Maybe you are another dreamer?