jach0o (3rd May, 2019)
jach0o (3rd May, 2019)
hey your pm is full so i quote you insted,
help me with my cable i get CAN: Not Ready, my cheap aliexpress clone works but this cable i bought from http://www.obd2cartool.com/ is giving me this CAN Not Ready
mycable
https://www.digital-kaos.co.uk/forums/showthread.php/99750-VAG-COM-VCDS-EVERYTHING?p=3501756&viewfull=1#post3501756
hello all does anybody have vcds 18.9.1 r1 because i need to update my cable 0x46 i have kolimar 7.2 loader i have looked and i cant seem to find it or if some one could point me in the right direction it would be very much appreciated thanks
Last edited by mrjay88; 16th February, 2019 at 01:43 PM.
Yeep me too. 18.9.1 AKP (Polish) doesn`t work CAN Not Ready with kolimer 7.2. Not sure earlier version VCDS with 7.2 Loader, but works 17.8.0 with Lolimer loader v2
Another things.. vcds hex v2. Doesnt work 18.9.1 ENG with kolimer 7.2. The same issue. CAN NOT READY, but partially works with 18.9.0 eng
Partially means... in example 03-ABS i can't use function BASIC SETTING looks like disabled, another problem is 4 modules example Engine, ABS and 2 cant remember which, vcds show me message like Cant find .ROD file (look picture)
All was tested with Skoda Citigo 2014
I have another vcds but is Can-hex and there i just use 17.1.3 and 17.8.0 software with loader kolimer loader v2 and there work all stable without issue.20190211_162015.jpg
Last edited by pocinas; 17th February, 2019 at 03:19 PM.
My post helps you? Please Hit Buttons
jach0o (3rd May, 2019)
Hello everyone.
I am in the need of a new cable after a friend borrowed the computer and accidentally accessed the internet so now my it says my cabel is unregistered.
I have seen someone talking about HQ clone that you can buy and still be able to access the internet on the computer, i think this will be the way to go so it doesn´t happen again.
I only see people talk about the cable but no link to this HQ clone.
I have found two different cables on obd2cartools.com that i am choosing between.
1: https://www.obd2cartool.com/vagcom-1...anguage-p-1263
2: https://www.obd2cartool.com/atm-182-...k-cable-p-1561
The first one looks like it can be a HQ clone since it says it supports internet, and it also supports updates.
Is the description correct about the fist cable or should i save the money buy the second one instead?
Pasting links to pictures of the cable i have today.
https://imgur.com/ywzniRa
https://imgur.com/2geoB3H
https://imgur.com/pUFyOrg
https://imgur.com/y8JTJvb
https://imgur.com/Xi8NUq8
I dont have the tools or the knowledge to solder and reprogram my cable.
Regards Dennis
@Slarva
pm me, no need save moneys for new one! i sort out for u free
prepare team viewer and interface conected to a a car
cheers
If freedom is outlawed, only outlaws will have freedom!!!!
Slarva
Read here.You can fix the cable yourself.
https://www.drive2.ru/l/518948048907273121/
This one is good too. It can be updated to 18.9.0 EN or other language.
https://www.obd2cartool.com/vagcom-1...43ntkn3nen2sn3
Last edited by Mario6; 17th February, 2019 at 10:40 PM.
Wow, even Russian sites are full of information how to make HUC work with MY2019 cars,
I have no doubts that in the next version Eric will make corrections to prevent HUC from working on MY2019 cars (this time for sure!), because the interface hardware is "incompatible" in reality, eh?
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
liviudiaconu (18th February, 2019), Tib82 (28th February, 2019)
Right, vcds detects it's a clone. These files are in UDS_EV. Compare it symbol by symbol.
ev_ecm10mpi01104c906020ap*.rod
Now post pictures of your fake V2 pcb and find the "right" version for this cable. It will not really work with latest.
Hi everyone, I'm new here.
Please, can anyone help with VAG-K+CAN interface driver software.
Last edited by opeoluwa529; 18th February, 2019 at 12:57 PM. Reason: Made a mistake
Hello,
can anyone recommend a cable / software bundle of obd2cartool, which works out of the box and with which I can encode my caddy.
Regards Tuono
Last edited by Tuono; 18th February, 2019 at 06:22 PM.
Cheapest option: http://www.obd2cartool.com/vagcom-16...version-p-1266
High quality option: http://www.obd2cartool.com/atmega-va...hipping-p-1554
In either case you will need to do a quick reflash (takes a few minutes, no special tools needed) in order to use latest VCDS and loader
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
Bookmarks