@kubuswujo
Correct cksm in writing...
edc15c7 PSA (2-plug)
HI!
I need immo off for EDC15C7 in Peugeot Boxer from 2001 year 2.8HDI
HW: 0281010486
SW: 1037360012
I post ori FLASH and EEPROM.
Please someone make IMMO OFF or give instruction how to change dump.
Will Rep and THX
Thanks
Kuba
>>Genuine Winols, Swiftec, Ktag, Flex, x17<<
>Diagnostic, Chiptuning, Dashbord<
@kubuswujo
Correct cksm in writing...
edc15c7 PSA (2-plug)
Last edited by fabrag; 4th January, 2019 at 09:58 AM.
kubuswujo (4th January, 2019)
@Fabrag i made checksum with mpps and your file not working...
Car does not start.
And to read this ecu on bench i had to unsolder immo eeprom. From information in forum i have read that to read EDC15C7 on bench via pinout i need to:
unsolder eeprom
or make immo off in flash.
But when i have written your immo off solution, the car does not start.
And after soldering eeprom i still cannot read/write it using kess or mpps. When i usnolder eeprom then i can read write ecu via pinout.
so can someone send working solution?
>>Genuine Winols, Swiftec, Ktag, Flex, x17<<
>Diagnostic, Chiptuning, Dashbord<
Hi Kubuswujo,
Sorry to hear that...
The immo is in the flash (29F400) and nowhere else...
Are u sure cksm is ok?
You can try this file if you want (cksm ok)
Last edited by fabrag; 4th January, 2019 at 04:39 PM.
kubuswujo (4th January, 2019)
HI YOUR OFF
TRY AND POST RESULT
Thanks a lot.
I will try tommotow both solutions i think that checksum were ok but i post file from mpps.
Will report if it work.
As i understand on good working immo of
i should be able to read this ecu with eeprom soldered so it is easy to find out if immo off is working or not.
>>Genuine Winols, Swiftec, Ktag, Flex, x17<<
>Diagnostic, Chiptuning, Dashbord<
fabrag (4th January, 2019), petrevichmail (11th April, 2019)
hi friends
which file working fine ?
thanks
kino 123 works!
>>Genuine Winols, Swiftec, Ktag, Flex, x17<<
>Diagnostic, Chiptuning, Dashbord<
Please, can you send me the pass? Thanks
kino 123 can i have password. thank
read your ecu.................. and don't spam please
https://www.digital-kaos.co.uk/forum...=1#post4361088
need help
now my goal is to buy xp-005
who will help?
hi Rafal. i dont have a backup. i have fix with imo decoding car not start
I received 2 ecu the mechanic had already done the off with immo decidincg so I do not have the backups. That's why I want a safe solution.
HI!
I need immo off for EDC15C7 in Peugeot Boxer from 2001 year 2.8HDI
HW: 0281010486
SW: 1037360012
I post ori FLASH and EEPROM.
Please someone make IMMO OFF .
0281010486_ori.zip
Thanks
Hi
Your file Off
Regards
Bookmarks