Hi.
Really no one here is skilled enough with mercedes diagnostics to share some help on this matter?
Regards,
Hi.
Need help recode scrapyard unit to car. Have xentry, and access to Star interface.
Just need to know the procedure to make the recoding.
Now stuck with error P1511 on BAS-ESP control unit, is the only error. But abs not working properly and so ESP.
Posted days ago help request at another subforum but without luck.
https://www.digital-kaos.co.uk/forum...y?goto=newpost
Maybe someone on this one can help, maybe a xentry simulation video how to do it will help.
Other choice would be someone kind enough could log in remotely and do it.
Thanks in advance.
M.
Hi.
Really no one here is skilled enough with mercedes diagnostics to share some help on this matter?
Regards,
What a model is a Mercedes
morgano (21st September, 2019)
Is the module you have replaced compatible with the old hardware and software number? In the STANDING instructions
it says it is replaced without the need for transcoding
morgano (21st September, 2019)
Hi.
The module itself was phisically exact, not the software of course, but i swapped the processor and the eeprom, now the module is detected as properly for 463xxxxxx but cannot get rid of the error P1511-05 variant locking on the BAS-ESP module, it is the only error present. Guess need a full reinit of the module because the normal "soft adaptions" pressing F3 and then power on and off the engine produces no result.
Thanks for taking your time having a look
Bookmarks