Of course you can, very easy.
Hi DK members,
I need one information, Astra G key remote is reusable, old key remote dont work (car start normally),can i just change with a new key remote electronics and program manually or i need to program by Obd?
Never do this car before, customer will be at my house tomorrow.
Thanks in advance.
Sent from my Commodore 64
Of course you can, very easy.
Keyblade (15th May, 2021)
Can i do manually or need to add remote with diagnostic? ( customer dont have pin code card)
Sent from my Commodore 64
Oh sorry, I missed that one. Remote is being programmed by diag. PIN code is only needed when car have factory alarm which is rare.
Keyblade (15th May, 2021)
Check rear cover, maybe details still visible.
Bosch RK203 most common (non alarmed)
Megamos S-AM rare (alarmed)
Keyblade (15th May, 2021)
There is 2 version on this remote and the new one must be the same like the original one
Keyblade (15th May, 2021)
Very easy to program Astra G remotes with CK100. Also generate remote with mini key tool and program it. After programming you can synchronise it manually (when it is necessary)
I always do with opcome you need the pincode.
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
Here: https://youtu.be/sliBAG9UQ3k
NO CARPASS NEEDED!
pin code is only needed for the megamoss sam remote ( alarmed system ) not required for the bosch system ( not alarmed )
Last edited by rapidlocksmiths; 22nd June, 2021 at 11:16 AM.
godfathertwo (22nd June, 2021)
Bookmarks