Try all injector code with 00000010(all 0, and last two place type 10)
Maybe you have bad configuration ar you most virgin that ecu eeprom...
Sent from my Nexus 5X using Tapatalk
Hi
Have trouble P1613 with a 307SW 1.6 HDI 110 hp 9HZ EDC16C34.
Injector coding was lost after disconnect batery .Injectors now is coding with lexia but trouble p1613 stay.
after starting engine , have max 3000 rpm . starting next time engine work normal without problems p1613
tried configuration ECU ABS---ENGINE BLOWER---CRUISE CONTROL--- without success
br
Try all injector code with 00000010(all 0, and last two place type 10)
Maybe you have bad configuration ar you most virgin that ecu eeprom...
Sent from my Nexus 5X using Tapatalk
skona (12th October, 2016)
post youre vin number maybe i can helpyou
skona (12th October, 2016)
Traying put code injector 00000010 , code accept but trouble P1613 stay
vin number VF33H9HZC83959916
br
Last edited by skona; 17th October, 2016 at 06:29 PM.
Can you shot you configuration screen on pp2000 or diagbox?
Sent from my Nexus 5X using Tapatalk
Peugeot P1613.jpg
Try disconnect battery for 15min.
battery disconnected 20min --- trouble P1613 -
injector cod 1- 00000010
2- 00000010
3- 00000010
4- 00000010
Last edited by skona; 14th October, 2016 at 06:19 AM.
Abs is multiplexed
You must change all invalid value...
Sent from my Nexus 5X using Tapatalk
Try with virgin eeprom... If you need, i will send you..
Sent from my Nexus 5X using Tapatalk
i think i can help with that probme.
skona (14th October, 2016)
Is the sw in MPC original?
Bookmarks