Write this and sunhro dlc away.
Write this and sunhro dlc away.
NB!!! Don't ask in PM old file password , Im not remember.
dd1 (11th December, 2019)
thank you BREND, but this is what is happening. i can read, but when i write your file, i get an error. so, i tried the original to write it back, again it is giving me an error. using the GQ-4X4 and never had problems before. using the socket adapter, no soldering. i am stuck here.......any help would appreciated. thank you in advance
Last edited by dd1; 11th December, 2019 at 06:28 PM.
clean 29f400 pins, clean adapter. test again if dont work use new 29f400.
But dont know why you desolder... use bootpin and overwrite aif, vin, isn... .
dd1 (12th December, 2019)
thank you, before i have tried it on a different bmw and with this boot pin never worked for me. when i hook the boot pin, i loose the communication and nothing can be retrieved. i have seen the video on the youtube, people do it works, but not with me. i will try it with F400 and see what happens
It has to be exactly the same ID of a flash, otherwise it senses and asks to correct. As soon as I correct it, reads, but won't write.
Did you choose correct one?
for e.g. AMD 29F400BB not 29F400AB ... ? Sometimes programmer have problem with.
GQ4x4 Programmer?
Test to write this one.
I wrote this file for testing today to a F400... works like a charm. So must be your setup or programmer.
your programmer is not good for this job ..........chainge programmer and made the flash
No, some MS42 got problem with flash another sw-version.hello guys, i have another dme, can i write this file to any used dme and make it work?/? or it is specific???/? i have found another used dme and would like to use it. thank you in advance
You will see dtc code 100 , intern memory fault and car didnt work.
If you flash correct one dtc will gone. So depend on ecu hw.
thank you. i will find another dme with the same part number and post the flash here.
Bookmarks