Not read as 16 bit, and if you wrote over the original your eeprom is now corrupt and you need a new dump.
Hi.
I don't know what's wrong with this bike's tacho, the encoding system is different than 2005's.
I need to recalibrate a tacho to 27000km and I don't know why but the datas are not as expected when I read them on 93C56.
Here are 2 dumps from 2 different 2008 bikes for example and the mod I tried.
Mileage should be in 0080, 0090, 00A0 and 00B0 lines and it's not.
Can someone help me ?
ZX10R-2008-Original-dump-(70254-km).zip
ZX10R-2008-Original-dump-(Unknown-km).zip
ZX10R-2008-Mod-dump-(27000-km-error).zip
Thanx a lot.
Not read as 16 bit, and if you wrote over the original your eeprom is now corrupt and you need a new dump.
Please DO NOT PM me asking for help.
Post in the forum, that is what it is here for.
BigBlock (8th June, 2018)
Thank you Clusters.
So simple ?
Past models (2004 - 2007) are ok with 8bits so I didn't tried with 16bits.
I'll try and be back
As a rule, you always read dash files in 16 bit.
Please DO NOT PM me asking for help.
Post in the forum, that is what it is here for.
You are the Boss Clusters ! You provided the solution and now it works.
I'll remember always using 16bits now.
By the way, I've spent some hours to look for a tool which could convert 8bits to 16bits without success, and I saw I'm not the only one who did this mistake.
Many thanx and good night.
All 93cx6(No A or B character at the end) = 8bit or 16bit:
93cx6 16bit = pin 6 is not connected to anything (or is connected to vcc(+5v))
93cx6 8bit = pin 6 is connected to vdd(negative).
All 93cx6A/B
93cx6A = 8bit (and cant be set to 16bit)
93cx6B = 16bit (and cant be set to 8bit)
Taken from another post on DK, not mine, maybe it will help.
Diagcar1 (9th June, 2018)
Hello! Do you have the file for the zx10 2008? I lost my file. help please
thank you
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ONLINE CAR FILE EDITION SERVICE
SERVICIOS DE EDICION DE ARCHIVOS AUTOMOTRICES
yes I found it. in the previous post it is in 8 bits. it does not work either
jomberykaso (12th May, 2019)
file original is 16 bit
Yes. You are right. My mistake. ..sorry
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ONLINE CAR FILE EDITION SERVICE
SERVICIOS DE EDICION DE ARCHIVOS AUTOMOTRICES
eletrica brasil (12th May, 2019), esobrino9 (29th July, 2020)
Hello, I need to correct the mileage from a 2008 zx10r. I will buy a tool to read the eeprom , but meanwhile can you point me to a tool/tutorial to do that? Thank you!
odo.jpg
read 8bit is swap byte = error, you need swap again will ok
Hello. Need correction for 08 zx10r. Thanks
Now 36***
Need 32860 (or close)
i've read eprom with 2 tools, i don't know whitch one is good. please see atached.
Bookmarks