Anyone can post the correct pinout to power up this dash on the bench.
Thanks
Best regards
Nezocas
Hello need this dash pinout to power it up on the bench.
Motometer 5 4110 049 00
Enviado do meu 21061119DG através do Tapatalk
X-Prog 5.60 / Upa-Usb 1.3 / CarProg 4.74 and 7.28 / MiniPro / Galletto 4 VD300 / Digiprog 3 / SVCI 2018 / Autel MP808 / Autocom 2020.23 / USBDM / Skyprog / RT809H / R270+
Anyone can post the correct pinout to power up this dash on the bench.
Thanks
Best regards
Nezocas
X-Prog 5.60 / Upa-Usb 1.3 / CarProg 4.74 and 7.28 / MiniPro / Galletto 4 VD300 / Digiprog 3 / SVCI 2018 / Autel MP808 / Autocom 2020.23 / USBDM / Skyprog / RT809H / R270+
Here pinout to help others:
Plug with 24 pins:
+12v pins 17 and 18 ......... ground pins 9 and 19
Plug with 20 pins
+12v pin 2C1 (this one is not needed, but you can connect)
Last edited by nezocas; 25th August, 2022 at 11:15 AM.
X-Prog 5.60 / Upa-Usb 1.3 / CarProg 4.74 and 7.28 / MiniPro / Galletto 4 VD300 / Digiprog 3 / SVCI 2018 / Autel MP808 / Autocom 2020.23 / USBDM / Skyprog / RT809H / R270+
Hey, do you know how to connect the generator to test the speedometer?? which pins come from the abs sensor?? and whether the sensor from the ABS / ASD differential can be used. greetings Piotr
Bookmarks