Hello to all. Pony works good on rs232 real port, with usb to rs most time is not good.
Hi,
I'm trying to erase crash data from airbag module and having problems.
I am trying to use ponyprog to read and write the chip.
When i probe test without 5v power to the chip it says test ok but with power the test fails.
When reading the readout is just empty.
I built the serial adapter according to the schematics on ponyprog website.
The chip is desoldered from the circuit.
Any advice if doing this is even possible with these tools? A used module is so inexpensive that it will be cheaper than carprog so it makes no sense buying that as this is a one time thing. Just trying if there is a cheap way to get this done as I have nothing to lose with the old module.
Any help is greatly appreciated
Hello to all. Pony works good on rs232 real port, with usb to rs most time is not good.
IF I HELPED YOU PRESS THE " T " BUTTON
ezp2010 cheap programmer that car read 24,25,93. 25 and 95 are interchangeable
IF I HELPED YOU PRESS THE " T " BUTTON
Bookmarks