Hello.
Got an MVCI from China, working good. BUT! After last online update to 1.4.7 firmware (flash was successfull) it does not work anymore. Techstream does not connect to VIM, and it is no firmware version in the info about the device on the XHorse firmware update tool. It can be reflashed to version 1.4.7 again, but it does not help - firmware version still missing after flashing. Dont know what to do.
Thanks to any answers.
I hear about this problem with 1.4.7. Try back to older firmware.
I have old firmware on my work, but i will be there only 8 november. If you cant find old firmware before i go work then PM me, i send you file.
Ok, i'll wait. Many thanks.
I used 1.4.7 MVCI version with Techstream - it works good.
i have mvci firmware 1.4.7 and didn`t go..but i have try with driver 1.4.5 and 1.4.6.. anyone have the 1.4.7 driver?
Looking for firmware for MVCI (later than 1.4.5)
Yes, me too. Problem were solved by manual firmware update to 1.4.7 using *.mfu file, i got from my seller. Driver 1.4.8 were installed after, and work with Honda worse than 1.4.6.
Last edited by Sted; 19th November, 2010 at 12:31 AM.
Yes, sure. But use it on your own risk - it's for my serial number!
_http://rapidshare.com/files/431719108/MVCI001000389_1.4.7.mfu
Thanks to www.autotoolz.ru
Dose any body have 1.4.7 or 1.4.8 (if exist) mfu file? Links from these thread not working any more.. Thanks in advance
Need 1.4.1 *.mfu for repairing my china xhorse mvci. Can someone upload or send me this file?
Bookmarks