Mario6 (13th October, 2021)
Mario6 (13th October, 2021)
After one use, Vauxcom changes VID and PID and name to "USB Serial Coverter". The VID remains the same but the PID 6001. In the device manager, check your VID and PID. Previously, the name was "Opcom V2" - VID 0403 PID 4F50.
To revert to the previous name you would have to use MPROG 3.0 and upload the previous EPT (VID 0403 PID 4F50).
However, any newer SW Vauxcom or Opcom will rename you to "USB Serial Converter" and automatically load the higher FW 1.45, 1.64, 1.66, 1.67.
Is your Opcom still working and able to connect to the car?
Last edited by Mario6; 13th October, 2021 at 08:30 PM.
Solved thankyou very much, i have the same situation with vcds i bought before 2 months
A maked a mistake tried to upgrade sw to a higher level online to the vcds server and its blocked(i bought on aliexpres ) does anyone can help me how can i repair firmware of vcds cable ?
Sent from my SM-A125F using Tapatalk
Last edited by ASCM; 16th October, 2021 at 10:43 PM.
If you have an VCD$ interface with an ATMEGA 162 chip, use the KOLIMER 9.2 loader.
https://www.digital-kaos.co.uk/forum...light=vag+vcds
Last edited by Mario6; 17th October, 2021 at 10:25 AM.
Im opening it to check which mcu have
Sent from my SM-A125F using Tapatalk
Here the photos/ATMEL atmega 162/
Sent from my SM-A125F using Tapatalk
is it worth downgrading from 1.99v to 1.64v ?
thanks for ocflash
hello,i can t not download ocflash,please help my !thanks!
maybe this help
ecufix (22nd November, 2023)
Bookmarks