Read pin code from immo and program new keys this ist the best way.
Or explain why you need to immo off.
Read pin code from immo and program new keys this ist the best way.
Or explain why you need to immo off.
You must give number of ecu if you want answer.
But I think erikfrog have right.
one men bring this car for me two days ago, and was all wires cuts from immo box , and don't was ECU inside,so i get new ECU and now i want start this car faster. Ecu number is JACK XM2F-12A650-EA
i have same im*o no INKS XM2F-12A650-DA EEC-V
1999-2000 YEAR 2.3 petrol
ford galaxy
can clear dowm im*o correctly but will not accept keys have tried for 3 hrs and others have tried over 3 weeks
curently no keys programmed
code 1000 set ( will be clear now as ecm been off for two days
does any one know which chip to read on this ecm
and can tell me what to read so i can post for im*o off
i have same type of problem, did you resolve it?
I had one of these with immo problem and key wouldnt program. In the end it was because of engine control relay in fascia fusebox, replaced relay, then keys would program.
hello obdmaster,
i have a Ford Galaxy Immobox part#: 7M0 953 257 L or S, whenever i tried to program key using SBB, it will accept the key in the ignition as #1 key but will failed to accept the key #2 after i switch off and on as instructed,
pls i need immo off for ECU part#: 98VW-12A650-EA if possible.
regards
Last edited by autodiagservices; 6th February, 2012 at 09:55 PM.
Immo off galaxy .....?????
Ahaaaaaa......
Like dreaming....
Hi mates! I?m triying to find immo chip in ecm for match key but I dont find it. Does anybody know where is it?
Thanks in advance
Bookmarks