Hi,
here solution for immo off in delco ecu without read hc11f1.
I use from 9 years with success.
Not forgot to push thanks button.
All the best
scs-mem
Hi,
here solution for immo off in delco ecu without read hc11f1.
I use from 9 years with success.
Not forgot to push thanks button.
All the best
scs-mem
123cocorico (24th September, 2014), abdulrauf (26th March, 2013), almagssbe (18th July, 2015), ayllon308 (6th October, 2018), daniersms (13th January, 2024), DOUGLASDL (5th July, 2017), dragon100 (28th August, 2017), dragonveroon (11th May, 2017), eldani33 (30th April, 2023), elmaro (31st August, 2017), G2T (3rd October, 2017), Ginocar (31st August, 2017), Giovanni 2199 (13th January, 2024), issam216 (28th August, 2017), jacques23 (12th November, 2019), Jashmine1983 (28th December, 2014), JFR-Tuning (13th December, 2016), JotaB (1st October, 2014), lma377 (7th November, 2013), lounadak (7th January, 2024), mariusz1010 (30th March, 2018), nelson76 (9th June, 2015), odzim80 (12th June, 2013), Pro Tuner (4th August, 2021), rumensivanov (24th December, 2019), seide99 (23rd December, 2023), sejoo (21st December, 2014), SmartBoxx (22nd March, 2021), speedy100 (15th February, 2022), tomo776 (26th August, 2017), zaycew (16th November, 2013)
Thanks friend for clock file. Im portuguease but now im in angola.
have you some good immo files for usa and japoneses cars.
One more time thanks
Hi scs-men,
you have some solution with a dump to resolve the error of RAM in the ECU MAGNETI MARELLI ?
here in Brazil only resolved this error by reprogramming the microcontroller MC68HC11.
sorry dont work on Fiat Punto IAW 16F 27c512
hi, im interested for a sollution Fiat-Delco Ecu with Fiat Code 1 System.
Sorry my English is very bad.
Hi, tank for the file, but not work delco gm 8v, the memory is a 256k, the engine with 29f010 is a 16v but i dont have any ecu for probe.
Dear friends . nasratech company will release opel/vauxhal, Fiat pin reader
b.r.
Hi Friend. Can be used in ECU opel with M27c256B inside?
hello friend SCS.
fordays Please pass me a wiring diagram of the addresses to feed the plant with the source?
which pins should I feed 12v?
addresses to which (+) positive and (-) negative?
I have a Delco blue omega 2.2 / 1996. Can I burn a 27C512?
because it seems that the original is a 27C256. help me please.
be very grateful.
Hello!!
I try to connect ECU outside of the car but the light don?t blink. My unit have an 29F010. Should i use the same method?
Regards
thanks for sharing the file
Bookmarks