I recently bought the new starview 4, the box super usb.
I set it up and managed to get a good picture on all channels for about an hour but then the picture started breaking up quite badly.
I really wanted it to be working by Friday afternoon but I'm not confident it will be now.
I set the box up at then end of quite a long co-ax cable and attached to a splitter so when the picture started breaking up I spent ages trying to fix all the connections thinking that there must have been a signal lost somewhere along the line. After much frustration at not being able to fix it I plugged the box into the main line where it comes into the house and did a factory reset and fresh installation. I thought it was working ok at first but after a couple of minutes the picture started breaking up just as bad as before.
When I press the signal button on the remote it shows a level of 64% and a quality of 99%. I noticed that when the picture really broke up the level went down to 0%.
When I plug the same connection into the VM supplied box the picture is perfect.
Does anyone know what I can do to fix my box?
I was going to order a signal booster but if the problem could be with my box I don't want to waste any more money.
Any help would be much appreciated.
Bookmarks