No need read CID, no need use linux, no need use any program
-Erase new microSD
-Put microSD into Kess or Ktag, connect to computer and start Ksuite
-Create image in hex-editor and post here
No need read CID, no need use linux, no need use any program
-Erase new microSD
-Put microSD into Kess or Ktag, connect to computer and start Ksuite
-Create image in hex-editor and post here
Last edited by Digital Under; 20th January, 2019 at 11:15 PM.
AudiA53xxx (26th January, 2019), bergbahn (20th January, 2019), boxsport (24th June, 2019), licorne2 (14th September, 2019), MOBILTRONIC (4th November, 2022), prusony (9th September, 2019), ricardoadami (20th February, 2023), SW Perfomance (11th November, 2019), titinou67 (9th September, 2021)
Digital Under
Hi. I have a damaged SD card in Kess v2 5017 with a green PCB. I also have a second Kess with a red PCB. Kess with green PCB works with SD card from red. What should I provide you to fix this with green PCB. I have a new SD card. Do you need an SD card image opened by Hexeditor?
clear new sd card,
inser in kess,
connect to pc and run ksuite,
create image from microsd in hex-editor and post here
GM FORD DODGE
tuning - deleting - immo
Mario6 (21st January, 2019), SW Perfomance (11th November, 2019)
Digital Under
Hi. I did as you advised me:
- I formatted a new card,
- I put the SD to Kess,
- I started the software kess 2.23,
- I created a picture of the card (my second kess) in the hex editor.
After a moment Kess came to life.
However, the protocols do not work. I can not put the SD card image because it is too big.
EDIT
Already repaired.
Thanks.Digital Under
Last edited by Mario6; 21st January, 2019 at 09:01 PM.
AudiA53xxx (26th January, 2019), licorne2 (14th September, 2019)
I am very glad that you help too.
GM FORD DODGE
tuning - deleting - immo
I need to share a 4 GB image here?
I need to share a 4 GB image here?
I know, I forgot. Put in another .rar again?
kess or ktag?
GM FORD DODGE
tuning - deleting - immo
Kess V2 Red
Bookmarks