FGTECH 0475 Won't Boot

**Inked** · 6th February, 2020, 02:58 AM

Hi guys

I've been trying to install FGTech 0475 on windows 7 32bit.

Everything seems to install ok but it won't launch .

When I try and launch it I get a message saying "windows vista or above detected , making second patch" then the fgtech device makes a couple of clicks and that's it.

Does anyone know a fix?

Thanks for any help given

**figani** · 7th February, 2020, 03:42 PM

try to start as administrator...

**Inked** · 7th February, 2020, 04:07 PM

Originally Posted by figani

try to start as administrator...

Thanks for the reply

I've tried running it in xp sp3 compatibility mode and running it as admin but it still won't launch.

I've also tried installing it directly on C: drive and I have no antivirus or firewalls .

**blackpirate** · 7th February, 2020, 06:44 PM

try this !
yes, it change date, but will be reset automatic after exist software

hxxps://mega.nz/#!mkt20BCZ!kfWQp12Sq-8XJPcbg-vx92Md5_W_RAerMfD5PbmdOyU

replace xx to tt

**Inked** · 7th February, 2020, 07:15 PM

Originally Posted by blackpirate

try this !
yes, it change date, but will be reset automatic after exist software

hxxps://mega.nz/#!mkt20BCZ!kfWQp12Sq-8XJPcbg-vx92Md5_W_RAerMfD5PbmdOyU

replace xx to tt

Thanks I'll give it a go

What is it?

From the name it looks like a firmware flasher.

**Inked** · 8th February, 2020, 05:19 AM

Originally Posted by blackpirate

try this !
yes, it change date, but will be reset automatic after exist software

hxxps://mega.nz/#!mkt20BCZ!kfWQp12Sq-8XJPcbg-vx92Md5_W_RAerMfD5PbmdOyU

replace xx to tt

I downloaded it but it's just a flasher

**Inked** · 8th February, 2020, 05:27 AM

I went into windows event viewer and it shows that eobd2 is crashing.

**zoki21** · 9th February, 2020, 04:43 PM

to start the 0475 software first you need to connect it to the car, or that adapter to the power, then the software will start, after that it will start every time, whether you are connected to the car or not

**zoki21** · 9th February, 2020, 04:46 PM

well you have installed and you should hear that click since the windows vista appears, just do as I told you, do not insert anything further into the program 0475

**Inked** · 9th February, 2020, 05:04 PM

Originally Posted by zoki21

to start the 0475 software first you need to connect it to the car, or that adapter to the power, then the software will start, after that it will start every time, whether you are connected to the car or not

Thanks for the reply

I haven't tried connecting it to a car using obd yet , but I have been trying while it plugged in using the power supply.

**Panathaole** · 9th February, 2020, 06:26 PM

You don't need to connect it to car...
Check your driver, you didn't install it correctly,
I had the same problem, and in some times I must
run the program 2-3 times to start....

**Inked** · 9th February, 2020, 06:36 PM

Originally Posted by Panathaole

You don't need to connect it to car...
Check your driver, you didn't install it correctly,
I had the same problem, and in some times I must
run the program 2-3 times to start....

How do you install the driver?

I go into device manager and direct it to the driver folder that is in the fgtech installation folder.

Edit:
Is there a more up to date driver for windows 7 32bit amd processor?

**zoki21** · 9th February, 2020, 07:15 PM

if that doesn't help you then you have bad hardware that is defective, Chinese bad copy

**Panathaole** · 9th February, 2020, 07:53 PM

Uninstall and remove the driver, and install again...
Try to another pc or laptop...

**Inked** · 9th February, 2020, 09:28 PM

Originally Posted by Panathaole

Uninstall and remove the driver, and install again...
Try to another pc or laptop...

I have tried uninstalling and reinstalling it a few times including the driver, although I have read that some people need to install it a couple of times to get it to work.

The fact I'm getting crash errors from windows is making me think it could be a driver issue.