Launch X431-serial number change

[maruti]

if possible to desolder ic & than reading is possible tell me bcoz i do mobile reparing & i have all type of irda gun

all type of jtag , programmer

[sergej]

Com-port=RS232.
Need com-port or USB-com-port adapter.

[maruti]

thanks , i at home so tommorow i will try & post dump
4 wires to jumper on pcb ? & give 12v power supply
i use with laptop so this bluetooth port help or not , i mean to red this log
thanks

[sergej]

You can connect smartbox with emulator via cable
http://www.digital-kaos.co.uk/forums...ml#post1228360
Then connect second com-port for read .

[mattydr67]

I think S/N in .exe file. Licence.dat made X431serial update. See my Demo. Size Licence.dat=0. Then install Demo via X431serial update. Size Licence.dat=442b .

Sergej my frined
As I sadi we really just think wher the S/n it is
But as i told you before. When I just changed the licence.dat file from my softwear to other one took it from web the softwear tooked from web work in my machine
Yes you got right and I said the same that if you have unpacked softwears (original) you need V7.5 tool to creat the serial in licence.dat
If you just unpack the original softwears whitout using th v7.5 upgrade tool the licence.dat = 0 and the softwear will dosen't work in your machine
Well let's do it like this
Here it is my Audi v26.30 without licence.dat file
Take it and just put your Audi v26.30 licence.dat file from you softwear and tell me if its working for you
Good luck

[maruti]

tommorow i will reply u with add my licence.dat file & it is working ir not ?

[sergej]

I test your Audi v26.30 with my licence.dat-no work.
My licence.dat Audi v26.30

[maruti]

yes , audi 26.30 with my licence.dat file working in my case , if u want proof on day time i send video , but only my this smartbox with laptop bcoz i do not use pda version


attech my hyper-terminal file

[mattydr67]

I test your Audi v26.30 with my licence.dat-no work.
My licence.dat Audi v26.30

I forgot to tell you my frined that Audi v26.30 it is in English
This is important too
Try again and you'll see that it will work
Good luck

[maruti]

i have english & its working , bcoz i at india so i have english version

thanks

[maruti]

sergej , please check attech file & reply

thanks

[sergej]

Sorry,I can't read your file.
Setting Hyper-terminal

[sergej]

Setting Hyper-terminal 2
Test Hyper-terminal
In com-port DB9 pin2=input=0V.
Pin3=out=-12V.
Write any text-in windows Hyper-terminal=0.
Connect pin2 and pin3,write any text-in windows Hyper-terminal you will see your text.
In Hyper-terminal Transfer-Capture text-Browse-Desktop-Start.
Write any text,close Hyper-terminal.
On Desktop in .txt file see your text

[maruti]

ok , after connection smartbox connect with any software run or just connection & open htperterminal

thanks

[sergej]

Start any software and Hyper-terminal
Demo also have S/N .
I test Demo .