How to repair ABS system and units thread (repair,help,questions)

[lagas]

Yes you can do it on bench. Need have a look to wiring diagram. Corner ones in one side and other have positive and negative, and 18 or 32 ignition. Cant remember. Try to check tumorrow

[looly]

Yes you can do it on bench. Need have a look to wiring diagram. Corner ones in one side and other have positive and negative, and 18 or 32 ignition. Cant remember. Try to check tumorrow

Ok that would be very much appreciated pls mate. Cheers!

[lagas]

Ok the it is:
26,13 pin's is Ground
1, 14, 24 pin's is positive
21 is CAN-Low
23 is CAN-h

First try power and measure can pins. Sould be ~2.33v or youse scope.

[soxten]

We are bright and clever people here on DK, but still we have problem to solve G201-brake pressure sensor fault....
Ford/Volvo/Mazda use the same alu.block as call`d "2050"
Here as a selling advertice http://www.ebay.co.uk/itm/FORD-MAZDA...-/400291561666

BBA Reman fix this sensor problem and sell on ebay.

"BBA-reman has been successfully repairing a huge range of ABS for many years and our happy to announce we are now offering exchange ATE MK60 valve blocks for pressure sensor repairs via eBay.Common faults include but are not limited to:

• Traction control light on (ESP)
• ABS light on
• Pressure sensor fault codes (e.g. 5E20 / G201) .

This listing is for an exchange modulator block 2050 only. You will have to use your motor and ECU.

The warranty will only apply to the modulator block supplied.
This block actually fits a wide range of units, please check the 4 digit number on your modulator unit and make sure it is 2050. If it isn't please check out our other listings or contact us with the details of the 4 digits from the unit you requirer.
Most new ABS units requirer additional costs by needing programming. Since you are not changing the ECU, you will not need to recode it to the vehicle.
This unit is always in stock available for same working day dispatch if your order is received by 1600 GMT with cleared payment.
This item is sold as a Exchange replacement. So to make life a little easier for you included in the listing cost is return carriage enabling you to return your old unit trouble free."



Do any here on DK have a clue how to fix this sensor problem?

[thomas76]

The problem with sensor on MK60 is in sensor, wires alu connections break

Just one solution : Remplacement sensor

But i can not find seller for this

[soxten]

Any news on this Pressure sensor?

We must find a seller of this sensors!!!

[rewired]

Maybe the brake light signal will help

[soxten]

? Rewired?

[simaservis1108]

Anyone had any luck repairing Sprinter ABS with error C1401-007?

I have checked all wires and replaced 3 MOSFET's under alu housing.

Still same error.

[soxten]

Pictures of abs unit Simaservis1108?

[insomnia2009]

Sent from my GT-I9505 using Tapatalk

[titoarg]

I just read all this excellent report and I find no solution to my problem, I have ATE BMW reference module ABS DTC 100960-08053 5DF5 and C1DF5 ....
Repair any possible partner knows ?? Thanks

[madbg]

Hi to all.
I have problem with Peugeot 307.ABS light is on.Dash and motor ECU can't see speed sensor(speedo and mileage don't work,car don't have speed sensor, info for speed is from ABS) and ABS module.In BSI no errors.I can connect with ABS module and it has error "ABS module faulty". I open ABS module and there no broken wires(check with tweezers and microscope). ABS module is BOSCH 5.3(0273004562). I think its common problem for Peugeot.
Did someone have decision for the problem?

[cubica1]

a little contribution from my self for all members. Audi A6 2005y, ABS unit repairing.
rgds,
cuby

[teeone]

great thnx mate