Caterpillar flash files

**lordhacker99** · 2nd May, 2011, 04:40 AM

Your very right about the fuel wire. tricked that out and it helped more than anything ive tried so far. VERY PLEASED on that one. What flash file r u useing for that 625 2300?

**Juanincho** · 2nd May, 2011, 05:27 PM

Originally Posted by joeseph666

I see 155-4516... in there... but 4519 came up a blank.
Here is 160-8847 though.

Thanks a lot my friend, you really helped me !

**BlakSmoke** · 13th May, 2011, 05:04 PM

Hey guys wondering if any one has 2007 flash files? I searched the forum and didn't come up with any results.If anyone happens to have them it would be very much appreciated.Thanks

**wrenchead** · 14th May, 2011, 03:05 AM

hey guys i really need a flash file to make a 435 6nz in to a 475 1850. best file please. thanks much

**kwtech** · 14th May, 2011, 12:05 PM

Originally Posted by wrenchead

hey guys i really need a flash file to make a 435 6nz in to a 475 1850. best file please. thanks much

Couldn't find a 475/1850 file for the life of me, all I could find were multi torque, but this is a good 500/1850, I would recommend this

**POWERFREAK** · 17th May, 2011, 02:47 PM

Originally Posted by wrenchead

hey guys i really need a flash file to make a 435 6nz in to a 475 1850. best file please. thanks much

Wrenchead a 435 6nz has many different hard parts than 455 and above 6nz. The pistons are different they are 18:1 comp ratio where as the higher hp ones are 16:1 the cams are different also along with the injectors and turbo. You can uprate it to a 450 wich is a field uprate only without changing any hard parts.

**kwtech** · 17th May, 2011, 08:06 PM

Originally Posted by POWERFREAK

Wrenchead a 435 6nz has many different hard parts than 455 and above 6nz. The pistons are different they are 18:1 comp ratio where as the higher hp ones are 16:1 the cams are different also along with the injectors and turbo. You can uprate it to a 450 wich is a field uprate only without changing any hard parts.

Good catch, I misread that it was a 455, for sure there are lots of parts to replace, as you stated, cyl paks, cam, inj and turbo

**dmaan42** · 26th May, 2011, 07:29 AM

Hi does anyone have caterpillar flashfile 2707067 ?

**kwtech** · 26th May, 2011, 05:06 PM

Originally Posted by dmaan42

Hi does anyone have caterpillar flashfile 2707067 ?

Here you are, click Thanks and PM for password

**jackalfa** · 2nd June, 2011, 07:52 PM

Please Members, I need your help with this flash file 1735945, thanks in advance, regards.

**lituzz** · 6th June, 2011, 01:29 AM

Greetings, I have an EMCP3.2 controller on a genset, and I need to flash it. It has the following info:

Part No.: 3007646-01
S/N: 1648B059TA
Software Part No.: 3222198-00
Software Date: NOV2007
Software Description: L1 6_0 Standard -- Spanish, 2.2 Prod, 7Nov2007

Does this mean that the flash file I need is 3222198-00? If so, Can anybody share it? I have on my flash files: 3222197.FLS and 3222199.FLS

Thank you all in advance.

**stewars** · 7th June, 2011, 01:47 AM

Originally Posted by lituzz

Greetings, I have an EMCP3.2 controller on a genset, and I need to flash it. It has the following info:

Part No.: 3007646-01
S/N: 1648B059TA
Software Part No.: 3222198-00
Software Date: NOV2007
Software Description: L1 6_0 Standard -- Spanish, 2.2 Prod, 7Nov2007

Does this mean that the flash file I need is 3222198-00? If so, Can anybody share it? I have on my flash files: 3222197.FLS and 3222199.FLS

Thank you all in advance.

Ultimo flash file para el 3222198
Enjoy........