MPPS Repair

[ecutuners]

wich version to reflash my MPPS?

interface is dead now you cannot downgrade .

[mishu_b]

Can i make a copy all dump from C8051F340 with Beeprog programmer,or C8051F340 is protected?

it is protected - but you can try, nothing to lose.

atb

[bazare]

the only thing he loose is time ... he will never succeed.
@mishu ... tu parca erai la plaja, ca cauti pe DK?

[bricolo]

Hi
i try setup V5 and patch on my mpps clone with win XP
SP3 but no work:
before : File version 3.0.2.37
HW 4.03
unit serial 41323234

after : File version 5.0.1.10
HW 6.01
but unit serial 00000000
and mpps dont work
I've try this on my own risk and this post is just
to report.
Now i'll try to found good C5051F340 dump and i will
start again untill mpps work with V5

[scarymistake]

Hi
i try setup V5 and patch on my mpps clone with win XP
SP3 but no work:
before : File version 3.0.2.37
HW 4.03
unit serial 41323234

after : File version 5.0.1.10
HW 6.01
but unit serial 00000000
and mpps dont work
I've try this on my own risk and this post is just
to report.
Now i'll try to found good C5051F340 dump and i will
start again untill mpps work with V5

Have you tried this
http://www.digital-kaos.co.uk/forums...ml#post1160816

[bricolo]

Hi Scarymistake
Thank for reply, yes i tried this but when i run firmware
update: start-----> devise not found

[scarymistake]

Hi Scarymistake
Thank for reply, yes i tried this but when i run firmware
update: start-----> devise not found

Have you already connected the obd to the car ???
and then try to run FirmwareUpdate.Exe then MppsUpdate.exe ?

[bricolo]

I just try and always with firmware : devise not found

I've found on the net a C8051f340 to replace mine, i think i'll dont lost time and by this:

MPPS 5.0.1.13 / 8.0.2.10 MCU Repair and update kit

Thank for your help

[lolooo1981]

If the updaters not detect hardware i think clone is already updated or bricked.

[lolooo1981]

Did you try to run the official version ?
If original version see your clone as 000000000, your clone is dead,if it recognize like a clone your mpps work with cracked version.

best regards

[bricolo]

i think something wrong with my update since now
serial number is 00000000

[scarymistake]

i think something wrong with my update since now
serial number is 00000000

If you connected the usb you must see



If not then you have another problem (i think)

[bricolo]

yes, when i connect i have AMT flash and MPPS red light
is on

[scarymistake]

yes, when i connect i have AMT flash and MPPS red light
is on

And you have use the patch ????

try to put it in C:\Multi Protocol Programming System

[lolooo1981]

If your mpps is not reconize in official version for sure your clone is dead and need to change MCU.An other members have the same problem but after reboot the interface work,maybe you can try.
After the only solution is reprogram with dump or change MCU

Best regards