CARPROG FULL

[ovi_dk]

4.01 or 4.5 sw version????

4.01,i dont try ywt 4,5,for me worck ok 4.01aslo mi programmer dont have counter reset!

TULGEYWOODMAN I think there should be a section for clone users ...
this thread its for clone carprog,not oem,i know u dont like people whoo use clones but the world its not yours!!By the way the support of carprog oem its poor and when dont have a good answer dont answer to mail,now 2 months a go i sale mi oem carprog and know well codecard.lt and low cost suport,last year when i asck abouth cleare file for one airbag module 2011 focus,they say must to wait new updates and maybe ther will be)) greath help!!

[TULGEYWOODMAN]

4.01,i dont try ywt 4,5,for me worck ok 4.01aslo mi programmer dont have counter reset!

TULGEYWOODMAN I think there should be a section for clone users ...
this thread its for clone carprog,not oem,i know u dont like people whoo use clones but the world its not yours!!By the way the support of carprog oem its poor and when dont have a good answer dont answer to mail,now 2 months a go i sale mi oem carprog and know well codecard.lt and low cost suport,last year when i asck abouth cleare file for one airbag module 2011 focus,they say must to wait new updates and maybe ther will be)) greath help!!

well there you go, lets ditch all original tools and go for the clones!

Whatever makes everybody rich!

I did advise in another thread a few minutes ago, to buy the red rosfar clone from ecutool.com.cn!!!!!!!!!!!

[Meat-Head]

I think there should be a section for clone users ...ie peasants

This will HAVE to EXCLUDE PremierD and Drpeter and a few others.

What about a section for CRETTINS with orginal tools, that keep bleeting how good they are.

OFF TOPIC:-

So save clogging this thread up

http://www.digital-kaos.co.uk/forums...9/#post1590569

ON TOPIC:-

Can somebody explain more about Opel pin code reading please?

What can and can't it do?

[ovi_dk]

I have a friend who try more ecu from opel,can and k line,and all worck good,i do just one psg16 k line,on bosh can u can reed flash too with this clone and few option like change vin or force restart on ecu!Thats all wath know,i will come back with news after try more opel ecu!Regards

[tehnosoftex]

Tested today my china carprog. I learn a new key on audi a4 wih rb8 dash , read pin, read eeprom and learn key without problems. Tested on opel edc16c9. Can not connect as edc16c9 but did connect as edc16c39 but read an incorect dump and an incorect pin. However the VIN and mileage was correct and it can adjust mileage on ecu.

[TULGEYWOODMAN]

This will HAVE to EXCLUDE PremierD and Drpeter and a few others.

What about a section for CRETTINS with orginal tools, that keep bleeting how good they are.

OFF TOPIC:-

So save clogging this thread up

http://www.digital-kaos.co.uk/forums...9/#post1590569

ON TOPIC:-

Can somebody explain more about Opel pin code reading please?

What can and can't it do?

what ARE you on about....too many pies again I think

[lagas]

I have few ecu, maybe try today.

tested on 4.01.

Simtec 71.1 k-line all functions works. tested on bench
Bosch M1.5.5 k-line read, pin, immo synch, vin. Try read flash ecu not respond on 7%

[racin-snake]

I think there should be a section for clone users ...ie peasants

Peasants ?........................ WTF are you on mate ?
who died and made you emperor !

[TULGEYWOODMAN]

Ah well, one more emporer wont even be noticed among the hundreds on here!


racin-snake.......that avatar flatters you!

[racin-snake]

Ah well, one more emporer wont even be noticed among the hundreds on here!

neither will one more loud mouth fudd with a daft agenda of ridding the planet of clone tools

to QUOTE TULGEYWOODMAN .."IN YER DREAMS "

that avatar flatters you!

i admire clever people ..........................i despise clowns


i see our new emperor doesn't have an avatar ????? maybe due to the fact hes a nobody with a large mouth ??????

[solar]

gocardiag USD111,but with 19 cables(not included DIP8,SOIC8,but here A4 cable,so you can use own clips)....just receive today,not tested jet,but looks good all hardware quality.

[antibisic]

Has anyone seen this, apparently there selling all 21 adapters for 278 bucks with all sw activated. It even looks like they have made the exact carprog interface. Not sure i I can post links but if not administrator please feel free to remove it

CARPROG FULL V4.01 with all Software's activated and all 21 items Adapters NEW_Mileage Correction_Auto Scanner Tools_Auto Diagnostic Tools,Codes Reader,Auto Software, Key Programmer Suppliers from China-OBD2TOOl

bkenigma

But where is A1+ adapter?It is not included!

[PremierD]

Its a Big thread .. but closing it is just as easy .. so lets keep it amicable people ..

[autodiagnostic]

HELLO
be carefull for the clone because it canot udapte or it don't work normaly
the last version is 4.55
and the last car for vag work only online!!
the best is original tool!!!
rfegard

I get one from carprog full V4.01 repair tool for car odometers, dashboards, immobilizers it says "car prog full V4.1 will not be locked if you do not go to original website update.Our product can not update,please pay attention."
it's a little disappointed, but cheap price.

[lagas]

tested on 4.01.

Simtec 71.1 k-line all functions works. tested on bench
Bosch M1.5.5 k-line read, pin, immo synch, vin. Try read flash ecu not respond on 7%

tested

simtec 70 2 ecu read, write epprom ok, tested on bench
5wk9