VAG-COM/VCDS EVERYTHING

**AceDuk** · 11th December, 2018, 09:36 PM

Ok thank you

**Nilll** · 12th December, 2018, 05:30 AM

Good day, Thanks for the new bootloader. What are the differences from 7.1 .

**kayne30** · 12th December, 2018, 04:27 PM

Originally Posted by hid3

I think he asked fot GAL/ATF firmware, not dumps

Maybe someone knows the Vcc pin number on "HEX-V2" programming header? Thanks

Please help me with my hex v2

**Mchele2000** · 13th December, 2018, 01:06 PM

I would like to say a massive thank you. I managed to reflash a vcds clone up to 18.9 and everything is working perfect. Also thank you to Kolimer for his software. ps i have never done anything like this before so cheers guys.

**danwood76** · 14th December, 2018, 11:12 AM

Originally Posted by kolimer

A small Xmas present for everyone. Loader v7.2.

https://anonfile.com/K6Edt2n1bb/VCDSLoader_v7.2_zip
https://bayfiles.com/LaE7t2neb3/VCDSLoader_v7.2_zip
https://sendit.cloud/rkjgukdtbi6l
https://dbr.ee/pRvZ
https://www.dropjiffy.com/f/1RZITC1B
https://www.mirrored.to/downlink/IL28B8RH
https://clicknupload.org/yu067zfrpivj
https://userscloud.com/gcffimyjew97
http://uppit.com/ga8fqyx8evq1
https://1fichier.com/?lpqy20bquuhyshpfj1so
http://www.solidfiles.com/d/e88qBjzMaNXZY
https://uptobox.com/mf289uadv7in
https://www37.zippyshare.com/v/2go6ewCD/file.html

Thank you for all your hard work Kolimer.

Your software has revived my brothers old VCDS 12.x.

**snakema** · 14th December, 2018, 12:02 PM

Originally Posted by kolimer

A small Xmas present for everyone. Loader v7.2.

https://anonfile.com/K6Edt2n1bb/VCDSLoader_v7.2_zip
https://bayfiles.com/LaE7t2neb3/VCDSLoader_v7.2_zip
https://sendit.cloud/rkjgukdtbi6l
https://dbr.ee/pRvZ
https://www.dropjiffy.com/f/1RZITC1B
https://www.mirrored.to/downlink/IL28B8RH
https://clicknupload.org/yu067zfrpivj
https://userscloud.com/gcffimyjew97
http://uppit.com/ga8fqyx8evq1
https://1fichier.com/?lpqy20bquuhyshpfj1so
http://www.solidfiles.com/d/e88qBjzMaNXZY
https://uptobox.com/mf289uadv7in
https://www37.zippyshare.com/v/2go6ewCD/file.html

Thanks you for all your work

**Syrxes** · 14th December, 2018, 03:21 PM

48404170_303389070280819_76599814011224064_n.jpg 2.JPG
Hello, i have this cable i bought 2 or 3 years ago. It is working with software provided by manufacturer, but I can't access stuff like radio, headlight range or save long coding. Is there anything I can do with this cable, or just buy new one?

**Roma77** · 14th December, 2018, 04:41 PM

Originally Posted by Syrxes

48404170_303389070280819_76599814011224064_n.jpg 2.JPG
Hello, i have this cable i bought 2 or 3 years ago. It is working with software provided by manufacturer, but I can't access stuff like radio, headlight range or save long coding. Is there anything I can do with this cable, or just buy new one?

just buy a new, NEC-bad.

**Syrxes** · 14th December, 2018, 09:12 PM

Any advice on where to get new one? I’ve seen a couple sites, but most of them seem sketchy

**hid3** · 14th December, 2018, 09:33 PM

Obd2CarTool.com is the trusted source here..

**Syrxes** · 15th December, 2018, 12:59 AM

Originally Posted by hid3

Obd2CarTool.com is the trusted source here..

Thank you very much for your time.

**chora** · 15th December, 2018, 02:49 PM

thank you for your good work kolimer

**sahraoui1** · 15th December, 2018, 07:09 PM

Originally Posted by kolimer

A small Xmas present for everyone. Loader v7.2.

https://anonfile.com/K6Edt2n1bb/VCDSLoader_v7.2_zip
https://bayfiles.com/LaE7t2neb3/VCDSLoader_v7.2_zip
https://sendit.cloud/rkjgukdtbi6l
https://dbr.ee/pRvZ
https://www.dropjiffy.com/f/1RZITC1B
https://www.mirrored.to/downlink/IL28B8RH
https://clicknupload.org/yu067zfrpivj
https://userscloud.com/gcffimyjew97
http://uppit.com/ga8fqyx8evq1
https://1fichier.com/?lpqy20bquuhyshpfj1so
http://www.solidfiles.com/d/e88qBjzMaNXZY
https://uptobox.com/mf289uadv7in
https://www37.zippyshare.com/v/2go6ewCD/file.html

hi , very good job KOLIMER i love you so much
my cable vag 805.1 is now 18.2
thanks

**supermario333333** · 15th December, 2018, 07:42 PM

Hi @all,

I used for a long time the old 908 dump with my 232BM cable. Now I have read about the loader solution. In the info file it will described to cut the line between STC Pin9 and resistor R50. But on my PCB the Pin9 is connected to a transistor T5. Only Pin8 is connected to resistor R50. Which connection should I cut ?

thx
Mario