[QUOTE = mikroel; 3469662] Я кратко проверил вашу печатную плату и у меня есть один вопрос?
где 22pF подключен, одна сторона подключена к OSC 7,37 МГц, а другая сторона конденсаторов в воздухе? [/ QUOTE]
everything is good the second side on gnd
Last edited by Roma77; 11th January, 2019 at 04:12 PM.
With such success, friends will soon come to this topic RT and offer a contract for the development
Xoom Thank you, I just uploaded your gerber archive to JLC
Last edited by Roma77; 11th January, 2019 at 04:36 PM.
Hi, thanks for your help but in adaptation group "Axxx" there are not these channels :/ It's like a puzzle
Then you can even reduce the cost of your scheme, throw away 2x9637 + 7812 = comparator lm339
https://i.imgur.com/d42eO24.png
Last edited by Roma77; 11th January, 2019 at 05:10 PM.
I certainly don't understand how I could reduce the cost. but the goal is not to reduce costs, it is to have a 100% operational interface.
I'm not a vagcom expert, I had an interface like the one in the attached image, it broke down and I used the gal coming from this interface for mine. But when I tested it on an audi a3 2006 year, the interface doesn't erase faults. I had the doubt if the scheme was the right one.
Regards
Last edited by Mrjitter; 11th January, 2019 at 05:21 PM.
Yes ....is made and tested in a audi a3 . I don't have a gal programmer yet, so I used the old one.
The result is that after making an autoscan and finding several faults, the interface does not erase them, for this , i doubt if the scheme was correct.
Greetings and thank you for taking the time to answer.
Last edited by Mrjitter; 11th January, 2019 at 06:41 PM.
I think you need to know type of broken interface, donor gal, x44 or x46. And after that, program ftdi and atmega with corect informations.
Hi, is it possible this cable (soft. 12.12) to upgrade easy?
https://ibb.co/fNL4zTC
https://ibb.co/PwzGgc6
Last edited by gas43; 12th January, 2019 at 02:26 PM.
Yes. For me it would be very easy.
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
I will immediately start reading 508 pages!!
Bookmarks