VAG-COM/VCDS EVERYTHING

[Tuono]

In either case you will need to do a quick reflash (takes a few minutes, no special tools needed) in order to use latest VCDS and loader

Thank you for the information.
Unfortunately, I'm pretty clueless ....
As I understand it, I have to reflash the cable ....
where can I get the data / software for a reflash?
Thank you for the effort
Regards Tuono

[hid3]

Keep following this thread. Download/save the files which will be published. At the same time grab latest VAG C0M from official site and save it too

[pocinas]

Right, vcds detects it's a clone. These files are in UDS_EV. Compare it symbol by symbol.
ev_ecm10mpi01104c906020ap*.rod

Now post pictures of your fake V2 pcb and find the "right" version for this cable. It will not really work with latest.

You still think is fake hex v2?
I changed atmega162 as well and flashed gala chip again using content/correct dump from another forum (details PW). i Used programmerTL866 II Plus using instructions with lockbits and fuses, in package kolimer 7.2 there is any way ready project to open in tl866, so no need set lockbits and fuses, project is ready to flash.


So what you recomended then now?

Bassicly i found newest kolimer 8.x loader which should work with 18.9.1 eng but not tested yet.

[IJskonijn]

A v8 Loader? Where did you find that?
Correct me if i'm wrong, but 7.2 is the latest loader...

[pocinas]

A v8 Loader? Where did you find that?
Correct me if i'm wrong, but 7.2 is the latest loader...

Yes.. loader v8 but cant share public. Need ask first person who give me this.

[mrskoku]

thank you kolimer !

i have successfully updated my old and forgotten v11 beta cable to the newest version

[kaalis]

You still think is fake hex v2?

Yes, real V2 uses ARM cpu. There is no clone for it. Yet.
Your V2 is good clone, but still it's fake.

[DJAPROG]

Hello everyone
Can someone tell me if I can update this interface to date?
cable moyo hex usb
current version 12.12 fr
usb library version: 03.02.07
USB DRIVER VERSION: 02.10.00

buy 5 years ago at the dealer
disappeared since, his last email from him:

If you have a 12.X version
Evolution to the 14.10 free; Ditto, with updates for life.

Download this software: http://www.vag-reprog.com/download/Lector_VCDS.exe

dead link since of course.
or if someone will have a soft link that I could use?

thank

[DJAPROG]

Hello everyone
Can someone tell me if I can update this interface to date?
cable moyo hex usb
current version 12.12 fr
usb library version: 03.02.07
USB DRIVER VERSION: 02.10.00

buy 5 years ago at the dealer
disappeared since, his last email from him:

If you have a 12.X version
Evolution to the 14.10 free; Ditto, with updates for life.

Download this software: http://www.vag-reprog.com/download/Lector_VCDS.exe

dead link since of course.
or if someone will have a soft link that I could use?

thank

[kaalis]

yes, you can do it using loader archive.

[Roma77]

Hello everyone
Can someone tell me if I can update this interface to date?
cable moyo hex usb
current version 12.12 fr
usb library version: 03.02.07
USB DRIVER VERSION: 02.10.00

buy 5 years ago at the dealer
disappeared since, his last email from him:

If you have a 12.X version
Evolution to the 14.10 free; Ditto, with updates for life.

Download this software: http://www.vag-reprog.com/download/Lector_VCDS.exe

dead link since of course.
or if someone will have a soft link that I could use?

thank

Kolimer 7.2 download 0x44 18.9.0

[DJAPROG]

someone will have a link?
and how to program the pic ?

[Mario6]

someone will have a link?
and how to program the pic ?

See the previous page and you will certainly find it.

[DJAPROG]

524 PAGE

IF SOMEONE CAN TAKE THE HAND VIA TEAMVIEWER I PAY THE WORK WHAT IS LOGIC

[Slarva]

@Mario6 Thanks for the link, i have now successfully updated my cable and it works again!

@blackpirate Thank you for the offer!