AVDI or FVDI pcb components

**mohamedrhim** · 2nd January, 2021, 11:33 PM

تم الإرسال من Redmi Note 6 Pro باستخدام Tapatalk

**mohamedrhim** · 2nd January, 2021, 11:36 PM

Originally Posted by LABA331

Good day,

Message shows when try to use my FVDI. I have already checked flyobd for this issue. Apparently I need bin files to provide Machine SN. I'll keep you posted on solved....hopefully !!!!
Where can find kver and gopelhu?

Hello friend
I'm waiting for you
Please send the bin file
Thank you so very much

تم الإرسال من Redmi Note 6 Pro باستخدام Tapatalk

**mohamedrhim** · 7th January, 2021, 05:03 AM

Originally Posted by user2468

Please dont try to reflash your FVDI if it is working OK!
Try to write this fvdi boot v1.0 hex file via uart, maybe help.
Pass for Boot+Prog hex file pres Thanks + Rep.

To prog. the LPC1788 use MagicFlash + FTDI USB to TTL Serial Adapter 3.3V

Connections Here:
https://www.digital-kaos.co.uk/forum...=1#post2530475

Hi, any chance of pass pls?

**mohamedrhim** · 12th January, 2021, 02:31 PM

Originally Posted by user2468

Please dont try to reflash your FVDI if it is working OK!
Try to write this fvdi boot v1.0 hex file via uart, maybe help.
Pass for Boot+Prog hex file pres Thanks + Rep.

To prog. the LPC1788 use MagicFlash + FTDI USB to TTL Serial Adapter 3.3V

Connections Here:
https://www.digital-kaos.co.uk/forum...=1#post2530475

can yo give me password for rar thanks

تم الإرسال من Redmi Note 6 Pro باستخدام Tapatalk

**mohamedrhim** · 12th January, 2021, 02:40 PM

Originally Posted by r420

I can repair your FVDI: problem SN:00000. Priv

Can you repair my interface?

تم الإرسال من Redmi Note 6 Pro باستخدام Tapatalk

**mohamedrhim** · 12th January, 2021, 02:58 PM

Originally Posted by gopelhu

Hi all,

so thanks for some members that they answered some messages........

now i answering some question, pls understand for me anybody.......

1.) FVDI V2015 or higher with softdog versions:

If the pc cannot detecting any fvdi's then the LPC1788 processor was erased ( the Quickloader v6.3 and v7.0 will erasing the LPC processor ).

always erasing are the following two address: 0x00000000-0x00047FFF or 0x00000000-0x0007FFFF , pls check the attacment.

After the FVDI died bec there are no has a BOOT sector and the some firmware rows. Still i working on this solution.

2.) if you cannot bought any FVDI's from FLY Company, then the pc will go to internet then always erasing all FVDI LPC processors by FLY server !!!!!

3.) I solved all algorithms to fvdi firmware encrypting/decrypting and now i looking the 8bytes key to v2015 version. pls be patience anybody's.....

Regards, G

PHi friend please help me fix this device fvdi 2018 i have the same problem, thank you very much

تم الإرسال من Redmi Note 6 Pro باستخدام Tapatalk

**des7577** · 12th January, 2021, 04:14 PM

[QUOTE = user2468; 3498767] Please dont try to reflash your FVDI if it is working OK!Try to write this fvdi boot v1.0 hex file via uart, maybe help.
Pass for Boot+Prog hex file pres Thanks + Rep.

To prog. the LPC1788 use MagicFlash + FTDI USB to TTL Serial Adapter 3.3V

Connections Here:
https://www.digital-kaos.co.uk/forum...=1#post2530475
Attached Files Attached Files
File Type: rar Test_boot.rar (40.0 KB, 385 views)
File Type: rar TEST_BOOT+PROG.rar (423.0 KB, 513 views)5 [/ QUOTE]
Pass pls

**flyfvdi** · 13th January, 2021, 07:54 AM

FVDI 2015, 2016, 2018, 2019 ,FVDI 2 and all version SVCI with a battery

When the battery dies, the device will be locked

When the battery dies, the device will be locked.jpg

**Col19** · 13th January, 2021, 08:50 PM

Hi friends

Thank you friend Fly for your answer, the question is, if the battery does not finish the device could last? if so, it suffices to solder a second battery in order to avoid the end of the tool's life. If a friend has a solution without battery I would be happy, thanks in advance.

**flyfvdi** · 18th January, 2021, 08:36 AM

Originally Posted by Col19

Hi friends

Thank you friend Fly for your answer, the question is, if the battery does not finish the device could last? if so, it suffices to solder a second battery in order to avoid the end of the tool's life. If a friend has a solution without battery I would be happy, thanks in advance.

when you soldered a second battery, the device already was blocked

**flyfvdi** · 18th January, 2021, 08:38 AM

Help me for this problem svci 2020

https://www.facebook.com/groups/1844...06432682827165

**VoodooHaker** · 24th January, 2021, 04:03 PM

pls send pass for this file

Originally Posted by user2468

Please dont try to reflash your FVDI if it is working OK!
Try to write this fvdi boot v1.0 hex file via uart, maybe help.
Pass for Boot+Prog hex file pres Thanks + Rep.

To prog. the LPC1788 use MagicFlash + FTDI USB to TTL Serial Adapter 3.3V

Connections Here:
https://www.digital-kaos.co.uk/forum...=1#post2530475

**Col19** · 1st February, 2021, 09:16 AM

Hi friends

For tools with a battery, just add another battery using a 3.7V 18650 battery (much more durable than the round battery) which you lower to 3.3V with an AMS1117 mini voltage regulator module. To charge this 18650 battery you will need a mini TP4056 module using a micro usb 5V connector simply

It is a small DIY assembly to carry out to keep the tool as long as possible.

Good job