Garage Remote Control System

**huskypt** · 13th May, 2019, 04:20 PM

I have a garage remote control system and wanted to install a "push" switch to open and close the garage inside without the need for remote control.
Where do I have to make the connection?
Can someone help me?

Photo attached

**huskypt** · 14th May, 2019, 07:48 PM

basically i need "pinout" for switch....

**Meat-Head** · 14th May, 2019, 07:55 PM

Awesome, think we need a bigger picture on how it is wired.

can you contact the manufacturer, or can you get an eBay clone depots, put that in a push button

make model would help

**huskypt** · 14th May, 2019, 10:48 PM

Originally Posted by Meat-Head

Awesome, think we need a bigger picture on how it is wired.

can you contact the manufacturer, or can you get an eBay clone depots, put that in a push button

make model would help

that's right

Is a BERNAL Alpha50 torantriebe

thank you

**Meat-Head** · 15th May, 2019, 01:40 PM

You need to check with your own eyes, but the contact that says start blue termination
your “door bell button “

https://www.yumpu.com/id/document/re...rantriebe-gmbh

use a voltage meter, on them two terminals and press the remote see if changes

**rideon** · 15th May, 2019, 07:05 PM

Originally Posted by huskypt

basically i need "pinout" for switch....

Classic case of RTFM here...
If the pic you posted is what you got on the garage door, not some random internet picture...
You only got 2 places to jam wires to...
Lower left on the board "START" and "-" stick two wires there and a push button on the other end....

**Meat-Head** · 15th May, 2019, 09:58 PM

Originally Posted by rideon

Classic case of RTFM here....

where have I seen that before

alterntive would be poke and hope

**huskypt** · 16th May, 2019, 10:59 PM

Originally Posted by rideon

Classic case of RTFM here...
If the pic you posted is what you got on the garage door, not some random internet picture...
You only got 2 places to jam wires to...
Lower left on the board "START" and "-" stick two wires there and a push button on the other end....

It's right ? i use paint for simulator

**Meat-Head** · 17th May, 2019, 07:56 AM

Originally Posted by huskypt

It's right ? i use paint for simulator

What part of “yes” don’t you understand
bit like there is a “thanks “ button, press it every time you open your door

**huskypt** · 17th May, 2019, 11:50 AM

Dear friends, sometimes I use the translator because I have some difficulties. tomorrow I will test how you are in my example and I will report thank you to everyone

**rideon** · 17th May, 2019, 05:35 PM

Originally Posted by huskypt

Dear friends, sometimes I use the translator because I have some difficulties. tomorrow I will test how you are in my example and I will report thank you to everyone

Just read this
Your draw only got yellow lines...no yellow switch in sight....

**huskypt** · 18th May, 2019, 12:40 PM

Work is done. Thank you

**Meat-Head** · 18th May, 2019, 08:10 PM

Great, why not just brought correct remote.

love the way you have live mains, insulated using air.

if you want you can press my thanks button as well

**rideon** · 19th May, 2019, 02:00 AM

Work is done. Thank you

Errrrrrr, no,m8, that is NOK! you got yourself a crap door motor and added a crap remote module...sorry.
I cant see in your picture if the black connection for live wires has a fuse built in...!! bet it doesn't...
The extra remote module is definitely UNFUSED !
Please add a fuse there,safety first,,,,
And use some screws and some insulator and secure that remote module in the box,
a lot of vibrations there when the motor spins ...

**Meat-Head** · 19th May, 2019, 12:30 PM

Yes valid point, but in reality the next person in there, grabs that board and wish they didn’t

the thin china copper track, breathe on it will be a fuse anyway
more likly the thing would comit suidcde without popping anyfuse