Immo off Sirius 32 readed by ktag bootmode

**andbar2** · 11th February, 2020, 11:38 AM

I have Scenic 1,6 16v with ac Sirius 32 readed by ktag (different than readed in flasher) Need help to immo off this file with good checksum I remember to cut 58 pin or unsolder resistor in ecu. Ecu numbers S110030030 A 7700114970 7700110471.

**vladanr** · 11th February, 2020, 11:48 AM

scenic sirius 32 with ac immo off ori.rar here you are cut pin or desoder resistor

**IPrometheus** · 28th September, 2020, 09:59 PM

how do you read sirius 32 with ktag ? i tried with boot mode but it says to me "communication error... control all connections". do you know something ??
Best regards .

**volorucinski** · 28th September, 2020, 10:26 PM

Yes, my friend. I've seen your other post with nissan ecu. It works, but not by clicking the ems3132 ecu type. Try finding the right renault protocol in ktag for that ecu. Or, better, try Galletto. Or desolder, and write it into the socket with minipro tl866.

**IPrometheus** · 28th September, 2020, 10:53 PM

Originally Posted by volorucinski

Yes, my friend. I've seen your other post with nissan ecu. It works, but not by clicking the ems3132 ecu type. Try finding the right renault protocol in ktag for that ecu. Or, better, try Galletto. Or desolder, and write it into the socket with minipro tl866.

First.. Thank for your quick answer, its strange because in the ktag (clone) that i have. i have read a ems3132 with the protocol 336 (renault but with a different boot) but in the process conection that ktag shows its appears like a sirius 32 conection (the ecu that i'm trying to read and says communication error with the ecu ) ... i will try to see what else can be the problem ... and if it doesnt work i'll buy galleto maybe.

**Xixi61** · 28th November, 2020, 07:07 PM

Hello,
I am coming to you because I have 2 offs to do on sirius 32
one is in fact working perfectly on the other hand the other I cannot read in boot to the galletto are there several schemas for sirius 32?
which one you use thank you

**Tanjona** · 28th November, 2020, 07:57 PM

Latest Ktag
3

**Tanjona** · 28th November, 2020, 08:01 PM

Originally Posted by IPrometheus

how do you read sirius 32 with ktag ? i tried with boot mode but it says to me "communication error... control all connections". do you know something ??
Best regards .

Hi guys, latest version ktag clone can read and write sirius 32

**Travisrenaultma** · 30th November, 2020, 11:22 AM

Hi guys

Please help Immo off.
Megane 1 1.6 16v Automatic gearbox, with ac
Sirius 32 H
S110110004
8200055742

Dump attached

**vladanr** · 30th November, 2020, 11:37 AM

grant 1.rar here you are cut pin 58

**Travisrenaultma** · 30th November, 2020, 11:59 AM

Sorry vladanr but will not let me access grant 1.rar

**vladanr** · 30th November, 2020, 12:04 PM

grant 1.rar try again

**Xixi61** · 30th November, 2020, 06:03 PM

thank you guys but i'm reading me
i made a nikel sirius 32n
and the other sirius 32 doesn't want to know anything
but I pence that the protocol is not the same because one with infineon microprocessor and the other siemens
if someone can read the Siemens microprocessor, I would like to use the method, thank you