Yes it was. Can give you a link if wanted. Return postage included.
Yes it was. Can give you a link if wanted. Return postage included.
Thanks. I try to find solution myself. Maybe one day someone will help.
All the helps there mate.just follow the instructions.......Paul
If your Happy with the Help push the Thanx button
PAUL
Like I said did all I could with all instructions. Still no luck
Hi,
I'm fairly new to this, Ive had my F5S for about a month now and have had no problems whatsoever (touch wood)
Ok, so last night I decided to unplug the F5S and take it upstairs to watch, Unplugged all the cables and plugged my upstairs cables in, turn the box on POOF! a dim 8 with red light, Then the box counts up to 100 and then flashes the dim red 8 and reboots counting up to 100 again followed by the dim red 8, It just kept looping over and over.
I tried unplugging various cables and plugging them back in - No matter what nothing would stop it looping.
After trawling through various web pages basically everyone seems to think its buggered so I thought i'd return it,
Took it downstairs and without thinking plugged it back in POOF! all working again like nothing happened!
The only thing I can think off is maybe the upstairs sockets might be overloaded, I had the box in an extension lead with laptop,tv and blu-ray player in same 4 gang extension
My downstairs setup is very similar however the extension socket downstairs has built in surge protection (about?20 from argos) - Now I dont know if this is a solution for anyone else but it worked for me
dotcomsimon...when you had the box upstairs, did you try booting the box with the LNB cable disconnected?
Sometimes a rebooting problem is caused by a short circuit in the LNB cable.
It wouldn't have anything to do with the mains connection.
I have the same problem code 8 and the dim red light, help, can not get the firmware update
I also now have 4 of these dead boxes - faint no 8 , can't seem to do anything , with them ?
Hi I did this upgrade now it asking me for a pass code to get into the menus do u know wat they are
Try 0000 or 6666..
Hi could i have the link to the ?12 fix it dood, I've come to this last resort prior to throwing mine in the bin.
Regards
Last edited by tomjames123; 27th August, 2014 at 03:16 PM.
Just aquired an f5s with the same problem, tryed my power supply from my f5 and it worked... seems to be a psu issue.
checked the voltage of the psu i got with it and its only outputing 5v....mine 12v
Bookmarks