MB IR NEC KEY PROGRAMER | PROBLEM |

**Junkyard Dog** · 4th April, 2020, 02:44 PM

Hi, i dont know where post this but i think here i am good.
Here is my problem when i install usb driver and run software i have "hardware error" can somebody help me?
I am using fresh and clear windows xp 32-bit

**narkeleptk** · 4th April, 2020, 02:59 PM

This thing is notorious for this problem. Its driver problem on your pc. Easiest thing is to install it in a blank winxp vm by itself.
This tool is hardly worth the effort tho. Never once would the remotes function work after renew when I played around with it.

**tothzsolt** · 4th April, 2020, 03:05 PM

hi freind wiew.......

https://www.digital-kaos.co.uk/forum...error-API-HOOK

**narkeleptk** · 4th April, 2020, 03:15 PM

No api hook issue for this one, you can see the program running in his photo's. Their issue is only system not finding the hardware which is only driver problem.

**Junkyard Dog** · 4th April, 2020, 03:37 PM

Originally Posted by narkeleptk

This thing is notorious for this problem. Its driver problem on your pc. Easiest thing is to install it in a blank winxp vm by itself.
This tool is hardly worth the effort tho. Never once would the remotes function work after renew when I played around with it.

Ok i test like this and give report here.

**narkeleptk** · 4th April, 2020, 04:39 PM

Another thing to keep in mind, Sometimes when software loads the first attempt will say not found but you can select between com 1 and back to com 3 a few times and will finally connect and say hardware found

**Junkyard Dog** · 4th April, 2020, 05:04 PM

Originally Posted by narkeleptk

Another thing to keep in mind, Sometimes when software loads the first attempt will say not found but you can select between com 1 and back to com 3 a few times and will finally connect and say hardware found

Tested but not working...