Hello everyone,
I'm joining the community to share some experiences and also seeking some advice regarding Toyota Techstream customizations. I am currently using Techstream v18.00.008 with a Mini VCI J2534 (Firmware v2.0.4 - FTDI FT232L chip).
Vehicle Specs:
What I have achieved so far: The connection is stable, and I have successfully performed several diagnostics and customizations, such as:
The Issue: I am trying to disable the "Key Reminder Buzzer" (the intermittent beep when the driver’s door is open and the key is in the ACC position). It is quite annoying when listening to music with the door open.
When I access the "Main Body" -> "Customize" -> "WARNING" menu, the customization screen opens, but it does not populate any parameters or values to be changed. It remains blank, even though other menus like "Power Window" and "Door Lock" work perfectly.
Current Selection in Techstream:
Has anyone experienced this "blank menu" specifically in the WARNING section for this model? I am wondering if I should try an older version (like v12) or if there is a specific Region/Option combination that unlocks these parameters for the Latin American ZRE143L.
Any insights would be greatly appreciated!
Best regards,
ValterFDS
I'm joining the community to share some experiences and also seeking some advice regarding Toyota Techstream customizations. I am currently using Techstream v18.00.008 with a Mini VCI J2534 (Firmware v2.0.4 - FTDI FT232L chip).
Vehicle Specs:
- Model: 2011 Corolla (Produced 11/2010)
- Region: Latin America / Brazil
- Engine: 2.0 3ZR-FBE
- Model Code: ZRE143L-GEPNGG
What I have achieved so far: The connection is stable, and I have successfully performed several diagnostics and customizations, such as:
- Remote window roll-up/down (via key fob and key cylinder).
- Auto door lock/unlock logic.
- General Health Checks.
The Issue: I am trying to disable the "Key Reminder Buzzer" (the intermittent beep when the driver’s door is open and the key is in the ACC position). It is quite annoying when listening to music with the door open.
When I access the "Main Body" -> "Customize" -> "WARNING" menu, the customization screen opens, but it does not populate any parameters or values to be changed. It remains blank, even though other menus like "Power Window" and "Door Lock" work perfectly.
Current Selection in Techstream:
- Model Code: ZRE
- Vehicle Spec: 3ZRFE
- Option: Others, S/D; 1007-1112; w/o Smart Key
Has anyone experienced this "blank menu" specifically in the WARNING section for this model? I am wondering if I should try an older version (like v12) or if there is a specific Region/Option combination that unlocks these parameters for the Latin American ZRE143L.
Any insights would be greatly appreciated!
Best regards,
ValterFDS